LED Lighting Distributors

LED Strip Specifications:
Light Color:RGB
LED Type:SMD 5050
PCB Width:10mm
LED Quantity: 300 leds/32.8ft(10 meters)
Voltage:24V
Power Supply:24V3A
Working Temperature:-20 centigrade to 50 centigrade
Waterproof level:IP22(none-waterproof,use indoor only)

44 key remote control:
Type: 44 Key Remote Controller
Connection mode: Common Anode(+)
Color: 16 Colors
8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change R / G / B increase and decrease control

Tips:
The connect must be in towards to the arrows before you plug in the power supply.
Don’t left them on the spool when you testing them more than 2-3 mins.They need to dissipating heat.
Clean the surface before stick on the strip.If it is not sticky enough, you can add some double sided tape.

Application:
Widely used for home decoration use, hotels, clubs, shopping malls
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Backlighting, concealed lighting, channel letter lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile or contour lighting

Product Features

• New Upgraded Rope Light:32.8ft length,10mm width,300pcs of RGB SMD 5050 lamp bead in one reel.IP22 None-waterproof Level,all indoor use-Such as kitchen, under cabinet, dining room, bedroom, party, wedding and so on.Low power consumption, super-bright but running with low temperature
• 20 different colors:Red Green Blue Amber or White(not pure white)..you could mix 20 colors from the IR remote control,you could also DIY the color and save it,the controller has memory function,it will shows you the last color or flashing mode you turn off last time when you turn it on again
• Cuttable and linkable:Color changing LED Strip Lights can be cut to every 5 leds(6.5inch/16.5cm)without damaging the rest part,it’s new upgraded sponge double adhesive tape makes it more sticky on many dry flat surface than the old 3m tape
• Very easy to install: Home Circuit-24V Power Supply-Control box-LED Strip Light. Just plug and play.You could make it jump / flash / Twinkling/ Fade from the remote control. Remote control with 44 buttons (batteries included).It is dimmable,there are three different brightness setting via the remote control
• What you will get:1 X 32.8ft of SMD 5050 RGB strip light,1 X Controll Box,1 X 44 keys IR remote,1 X 24V3A power supply,our professional&friendly service