LightBiz — Make your life brightness, convenient & ease
LightBiz 18-LED rechargeable wireless under cabinet lighting, using infrared (PIR) technology to detect body heat and human motion sensor (within 15ft), the LightBiz wireless motion sensor light with 3 switch, offer more choice for you to put it in any place you like.
It is ideal for bedroom, closet, cabinet, workshop, garage, stairwell, hallway, pantry, storage room, corridor, etc.
ON/OFF/AUTO Modes:
ON: constant lighting
OFF: turn the light off
AUTO: light up automatically in the dark when motion is detected.
Specification:
LED Qty: 18 LED
Sensor detecting angle: 140°
Sensitivity: 15 feet
Battery: Lithium battery 640mAh
Power:1.6W
Lumens: 80 LM
Ambient brightness : ≤15LM ( “Auto” Mode)
Operating temperature: -10~50° C
LED Life Time: 80,000 hours or more
Material: Aluminum+ABS
Caution:
1. This light is non-waterproof, please do not install it in place with high humidity to avoid fault triggering. Better for indoor use.
2. Please change battery when light goes dim or strobe.
3. In “Auto” mode, the light may not work during the day or bright enough area, and please do not put two light too close to each other, the light of one may cause the other one not light on.
Package:
1 X 18-LED wireless motion lights
2 X Screws
2 X Snap bases
1 X Manual
Product Features
- BRIGHTNESS >> 18pcs pure white leds with 80 lumens, comfortable and environment friendly, to make your life ease and convenient.
- RECHARGEABLE >> This closet light built-in 640mAh lithium battery. Recharged about 2 hours via a micro USB port. After charging full, in “ON” mode, it will provides about 3 hours continuous light; In “Auto” mode, it will provides about 30 days (lights turns on 10 times per day).
- FUNTIONALLY >> ON/OFF/AUTO switch, can use it in any place. In “ON” mode, you can use it as a normal light. In “Auto” mode, the light only light up in dark when you get within 15 feet and off 15 seconds after you walk out of its sensing range or not movement, totally hand free.
- INSTALLATION >> 2pcs screws and 2pcs snap base are included, no hard wiring. Fix the snap base with screw in anywhere, then clip the light on it.
- WARRANTY >> 12 month replacement warranty and lifetime support guarantee.
Great to keep the kids from turning on and leaving … Bought one light to use in a windowless laundry room (6’x10′). Mounted it with Velcro (it comes with screw-in mounts but I chose not to use them) to the wall next to the overhead light switch so it comes on as soon as you walk through the doorway. Now, when someone goes in to grab something the led lights come on and provide plenty enough light to look around and find something. It is significantly brighter than an average nightlight but not nearly as much as the overheads. Great to keep the…
It’s “okay” with a few faults that I can live with Cute little light. Average brightness…perhaps a little on the low side. Comes with mounting brackets that screw into a shelf or other piece of wood and the light snaps in and out easily.Two things I didn’t like…first the switch (on/off/auto) on the side is VERY small and difficult to move into the “ON” position (the switch too easily moves all the way to the auto position). Also the “auto” function does not work property…it turns on whenever the light in the…
Its aluminum body makes it pretty durable. The led’s are bright and this works … This a about a foot long led light strip with a built in motion sensor. It takes 6 AA batteries. It works well and I am in the process of retrofitting a brass lamp with it. I am also replacing the batteries with a 9v wall wart so I can run this without the batteries. Its aluminum body makes it pretty durable. The led’s are bright and this works well for my needs. The ends are held on with screws which makes modding this easy as you can just unscrew the end caps and open it up. Excellent…
Comments are disabled for this post.