The Lithonia Lighting Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability.This innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing.
Product Features
- Easy and Safe Installation- innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. Only need 2″ clearance for install
- Highly Rated for Multiple Locations -CSA, IC, Airtight and Wet Location listed make LED Wafer ideal for indoor and outdoor residential, hospitality, commercial and multifamily applications and safe to contact insulation
- Extremely Bright Dimmable LEDs use 13.6 watts to provide 1,200 lumens with an 80 CRI, close to 90 lumens per watt. Dims down to 10% and compatible with select Lutron, Levitron, Synergy and Sensor Switch dimmers
- Ultra Thin LED design only requires a 6 inch ceiling hole and 2 inches of ceiling space are needed to fit LED wafer recessed light and UL recognized driver
- Saves Money and Time changing bulbs- Energy Star rating provides high light output with minimal power usage and will last 36,000 hours or +16 years when on everyday for 6 hours/day
- Ideal for new constructions, remodels or retrofit installations
- Connect directly to 120V power supply via provided UL recognized driver
- Meets Highest Industry Standards – CSA certified in the USA and Canada, Energy Star Rated, IC Rated, Wet Listed and Air Tight
- Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8″ knockouts with slots for pryout
- LED Wafer downlights are intended for closets, attics, hallways,bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas
- More electrical information and complete list of compatible dimmers are located on spec sheet
This review is specific to the 3” light. The thin wafer and detached driver is a good retrofit solution for shallow ceilings. The spring clips are strong and the fit to the ceiling is snug. Installation tips: A) for the 3” light, use the end knockouts, not the side knockouts. The driver box is 2.5” wide and will just fit through a 3” hole. Add a cable to the side knockout and the box won’t fit through the 3” hole. B) the wiring chamber is very small,…
Great lights! These are the only “Listed” LED wafer lights including their own junction box with driver built in!! So easy to install. Just use the included template to cut the exact size hole and simply use the spring loaded clips to keep very securely in place. Looks like a can light when installed. No protrusion from ceiling. We used a very shallow soffit to place these into above a kitchen sink area and also same thing for over a built in shelving area.These have included…
Comments are disabled for this post.