The Lithonia Lighting Retrofit Gimbal Recessed Downlight with 360-degree rotation and 45-degree tilt in both directions provides you with flexibility to point and guide light where you want it most. This is a perfect solution for sloped ceilings and textured surfaces and ideal for wall washing or highlighting artwork.
Retrofits into most existing recessed down lighting installations or new construction and remodel applications.
Technical Specifications:
Power: 7.7W
Input Voltage: 120V (Connects directly to power supply via provided UL recognized driver)
Luminous Flux: 500 Lumens
Emitting Color: 3000K (Bright White)
Dimmable: Yes, down to 15%
Light Source: LED
CRI: 90
Aperture: 2.44 inches
Overlap Trim: 4 .1 inches
Dimension: 3.88 x 3.88 x 4 Inches
Light direction: Downlight or Directional
Average life: 35,000 hours
Warranty: 5 years – Limited
Meets Highest Industry Standards: ETL Certified to US and Canadian Standards. Energy Star Certified, California T24 compliant and damp location listed.
More electrical information and complete list of compatible dimmers from Levitron, Sensor Switch and Lutron are located on spec sheet
Replaces: 3 and 4 inch LED gimbals provide as much light as a 50W incandescent fixture
Compatible Housing:
Lithonia Lighting 3 inch and 4 inch housings:
L3LED T24
L3RLED T24
L3
L3R
Which light colors work for me?
3000K: Used in family homes, hotels, coffee shops and other warm and sweet environments.
4000K: Used in homes with a need of a soft white lighting atmosphere.
5000K: Used in offices, working areas, shopping malls and other commercial areas that needs super bright lighting
Application Areas:
Ideal for new constructions, remodels or retrofit installations.
Living rooms, kitchens, hallways, stairwells, corridors, condos, apartments, club rooms, libraries and more
Uses:
Guide light onto artwork, sculptures, interesting architecture and more
Can be used to provide general light as well
Product Features
- 4 Inch LED Gimbal modules are perfect for providing general light. Great for wall washing, accenting artwork or highlighting architectural features
- Extremely Bright Dimmable LEDs use only 7.7 Watts to provide 500 lumens – dims down to 15% with common incandescent dimmers. See spec sheet for more info
- EnergyStar rating provides high light output with minimal power usage. Will last 35,000 hours. Save at least 80% on energy compared to incandescent fixture
- Adjustable Tilt – Module includes 180-degree rotation and at least 35 degrees of tilt which allows you to point where you most want the light
- Highly Rated for Multi uses – CSA, Energy Star, T24 Compliant and Damp Location listed make LED gimbal ideal for residential, commercial and multifamily uses
Literally, the easiest update Iâve made on my house so far! Literally, the easiest update Iâve made on my house so far! And they look amazing. These are over my fireplace and replaced some of those ugly old beige eyeballs from the 90âs. The 90s are over people and those eyeballs need to go out with the horrible shoulder pads that seem to be making a comeback. Anyhoo, you plug them into the light socket thatâs altrady there, connect the 2 wires, put the 2 steal pieces into the holders and push them up. LED integrated so they will last forever, save…
Bought for a sloped ceiling. I’m re-purposing a room that was a dog kennel attached to the main house. The room is 15′ x 30′ that is being made into three rooms, one will be a large pantry addition, one will be a work room, and one will be a 12′ x 15′ room (that exits to a patio area) that will be furnished with two recliners, a frig with water and ice, a microwave (for popcorn!), and a 55″ TV. and other furnishings….. a place to get out of the heat or cold when grilling on the patio. I first bought four lights to see…
Good Solution for Retrofit This lamp is an excellent solution for those places that are high up and you want a more directive light. It’s easy to install, also, once you figure it out. They don’t tell you, though, that you don’t have to strip the wires to make the connections … although I did figure that out. Also, you can’t squeeze the damn connectors together with your fingers! You’ll need a “robo-grip” or other flat jaw pliers to close them up. This lamp also works very well on a dimmer. I would have given…
Comments are disabled for this post.