')){kind=link}
Original reverse lights can provide, lower quality light and don’t illuminate the ground necessary for best backup camera image. Augmentation with the 3020 6-EX LED provides a great solution to this problem. Consider upgrading your existing incandescent reverse lights to LUYED LED backup lights (sold in pairs).
Light Base Size: 70mm (2.75in) x 40mm (1.57in) x 30mm (1.18in)
Light Wiring: Approx. 6.5 FT (2 m)
Led LED: 3020
Led Color: Bright White
Installation:
1.Clean surface thoroughly.
2.Remove rear case liner, pass harness through reverse light housing gap to inside of trunk.
3.Use clips to secure the auxiliary light wiring harness into reverse light harness or splice / wire directly.
4.Adhere adhesive tape to back of light. Remove backing tape and mount firmly to any downward facing surface.
PACKAGE INCLUDES:
1 x Auxiliary pavement illumination light.
1 x Fixed glue
2 x Wire holder
2 x Metal screws (No need been used when the adhesive is firmly fixed)
Need a different product? Just search LUYED along with original part / model number. LUYED has the answer to all of your automotive LED lighting needs!
Product Features
- 1Pc 3020 6 LED, SMD, Working Voltage: 9-30v. 70mm (2.75″in) base x 40mm (1.57″in) x 30mm (1.18in”). Approx. 6.5 FT (2 m) wire harness. ONE YEAR warranty against manufacturer defects.
- Bright, 6 diode beam, illuminates pavement upon reverse. Auxiliary backup light is a must for heavy fog and stormy nights.
- Application: Auxiliary LED Light For Brilliant White Backup/Reverse With built in CAN-bus Error Free controller. Compatible with all Cars, Trucks, Trailers, RV’s, etc.100% compatibility with all foreign and domestic vehicles.
- Wires directly into vehicle backup light harness in trunk or gate.
- What’s inside: 1 x Light, 1 x Piece custom cut double-sided mounting tape, 2 x Clips, 2 x Metal screws (screws redundant if surface clean, adhesive properly applied).
Related Posts
JDM ASTAR Extremely Bright PX Chipsets 7440 7441 7443 7444 992 LED Bulbs ,Brilliant Red
Note: IMPORTANT :There are two type […] Posted in LED Tail Lights
Cosmo 36 in. Ducted Wall Mount Range Hood with Tempered Glass Visor, LCD Display Touch Control Panel Wall Mounted Kitchen Vent Cooking Fan Range Hood with Permanent Filters and LED Lighting Cosmo Kitchen presents this powerful […] Posted in LED Lighting
Xprite 31.5″ 28 LED White & Yellow 7 Modes Traffic Advisor Emergency Warning Vehicle Strobe Light Bar Kit Compatibility:
Please compare the […] Posted in LED Lighting
Installed this on a 2017 Honda CRV to help with illuminating the area behind you when backing up I installed this Luyed backup lighting kit on a 2017 Honda CRV to help with the illumination when parking the vehicle at night. The Luyed LED light is well built with a metal enclosure and itâs waterproof. The installation only consists of two wires, and the light itself is not polarity sensitive so you just need a 12volt source from your backup light, and chassis ground. I first removed all the panels on the rear hatch and then removed the rear…
Small but helpful!
Great light for more than just backing up This is a great little light. I used it to replace the factory single incandescent interior light in my truck cap, which was very weak. Because of the lense design, this single light illuminates almost the entire space; the ceiling and corners near the tailgate are the exception.As someone who does off roading and camping, this light is compact and bright enough to serve several purposes: under hood lighting to illuminate the engine compartment, under chassis “rock lights”…
Comments are disabled for this post.