Specifications:
Power:45W
Voltage: DC 12V-32V
Lumens: 4500LM/pcs (High Beam) & 3200LM/pcs (Low Beam)
Dimension: 7 ” Unch Dia.
LED Chip: Cree chips
Low Power Consumption, Life Span: 50000Hrs.
Plug & Play, H4/H13 Adapter Included
Certifications: DOT, CE, RoHS, ISO9002, IP67
Application:
07-’17 Jeep Wrangler Unlimited JK 4 Door
07-’17 Jeep Wrangler JK 2 Door
04-’06 Jeep Wrangler LJ Unlimited
97-06 Jeep Wrangler TJ
81-’85 Jeep CJ-8 Scrambler
76-’86 Jeep CJ-7
92-’01 AM General Hummer
03-’09 Hummer H1 & H2
Land Rover Defender 90 and 110
AM General Hummer (1992~2001) Hummer H1 and H2 (2003~2009)(Hummer H2 needs extra 9007 male to H4 female adapter, package not included)
Package included:
2PCS 7″ Inch Round LED Headlights
2PCS H4H13 Adapter
Note:
There are small part of jeep jk,their passenger side housing is a little different from driver side housing,but both our headlights are exactly same,so it may require a little modification on the back of headlight or housing.
Product Features
- Easy installation – Plug & Play,H4 and H13 Adapter Included – Usually in 20 minutes or less,built-in anti-flicker hardness,no need extra decoder anymore!
- Made with original Cree Chips,50% brighter than brighter than other similar headlight.Operating Lumens Output: 4500 LM (High Beam),3200 LM (Low Beam) for each headlight.
- DOT Approved,legal on the road,over 80000 hours above life time.Color Temperature:6000K.Maintenance Free, Water-proof IP67.
- Fitment: Jeep Wrangler CJ-7 1976~1986;Jeep CJ-8 Scrambler 1981~1985;Jeep Wrangler TJ (1997-2006);Jeep Wrangler TJ Unlimited / LJ (2003-2006);Jeep Wrangler JK 2 Door (2007-2015);Jeep Wrangler JK 4 Door Unlimited (2007-2015);Land Rover Defender 90 & 110;AM General Hummer (1992~2001);Hummer H1&H2 (2003~2009) (H2 needs 9007 male to H4 female adapter, package not included)
- Package Included:2 x 7 inch led headlight + 2 x H4 to H13 adapter.Come with one year warranty.
Bright and easy to install
Great lights for my 2004 Jeep Wrangler TJ Rubicon, but SCREWY instructions! Dramatic improvement over stock lights. Don’t follow the instructions for…they said to take the grille off my Jeep (NOT necessary!). Just remove three T-15 screws to take of the bezel, then four more T-15 screws to remove the retaining ring holding the bulbs. Also, the instructions had pictures showing the lights being installed upside-down! Test them before you screw everything down…the brights should be on the BOTTOM! And don’t forget to adjust the position of the lights so you don’t…
Comments are disabled for this post.