Exclusive Magnetic Switch from Inspired LED. The Magnetic Switch is a handy control device which allows you to switch on or off your LED light fixture with the simple opening or closing of a door!
How the switch works Lights will turn on when magnet and switch are separated. Lights turn off when brought within 1 inch of contact. Magnetic switches with reverse functionality are available by phone order only.
Switch Details Comes as pictured with switch, magnet & screw, and 4″ black interconnect cable. The switch itself has 2 female 3.5mm x 1.3mm inputs- one for power and one for the interconnect cable to the LED lights. Mounts with adhesive for the switch, and a screw for the magnet.
Details of Items
(1) Magnetic Switch
(1) Screw
(1) 4″ Black Interconnect Cable
Dimensions
Switch: 1.3″ x 0.75″ x 0.44″ , Magnet: 0.75″ x 0.38″ x 0.12″
PLEASE NOTE
Power supplies, LEDs, and additional cables sold seperately. Compatible with 12V or 24V DC power supplies and dimmable transformers. Max load not to exceed 5A. Female connectors are 3.5mm X 1.3mm and are made to work with Inspired LED power supplies and accessories. If pairing with another company’s products, please determine connector size before purchasing.
Product Features
- SINGLE SWITCH | Durable new Inspired LED magnetic switch is custom built to last with our long lasting lights | Input 3.5 x 1.33mm
- QUALITY CUSTOMER SERVICE | Our company is in the United States and our customer service is the best in the lighting industry in our store and on Amazon
- MULTIPLE USES | Our magnetic switch can be normally open We do not offer the normally closed option on Amazon at this time
- DIY | Easy to install and will work with any LED lighting that uses Inspired LED cables
- INSPIRED LED LIGHTS | Don’t forget to check out our LED light strips for under cabinet lighting – Our lighting systems are known for lasting longer than other lights on Amazon Our lights last 10 + years
Perfect for connecting under-cabinet LED lights in parallel I purchased this to use with a set of under-cabinet lights because I needed some lights on either side of my built-in microwave. Check out the photos to show my setup using the distribution block. With this distribution block, you can connect the lights in parallel instead of in series.I used this with B-right 12-inch Under Cabinet Light ASIN: B01I51P97Y…
Terrible Flawed Design in a nice LED System — Does NOT Establish a Solid Electrical Connection! I installed the Inspired LED system in our kitchen in 2012. Recently the system dimmed and then went out. At first I thought that the power supply had failed, but after further trouble-shooting, I finally determined that the distribution block was the issue. If you wiggled the plugs into the dist block they began to flicker. So I ordered a new distribution block, installed it, and the new one did the exact same thing!! Terrible flawed design!! I returned the new dist block and I simply…
To date, these Tiger Paw connectors are definitely the best, most reliable, and easiest to supply power to a light strip in all of the various methods and devices I’ve tried, (and I’ve tried many). They even have a “How-to” tutorial, which was very helpful but apparently I can’t give the exact link, (it’s an Amazon rule), so if you type something like “Flexible Strips Solderless Tiger Paw LED Connectors” you’ll see some short tutorials about how to use it.I purchased…
Comments are disabled for this post.