Product Name:Dome Light Fixture Double
Specifications:
Voltage:DC 10-24V
Wattage:6-7W
Lumen: 560LM
Light color temperature: 4000-4500K
Color:White
Bulbs Type:LED
Weight:195g
Material:ABS+PC
LED type: SMD2835, 48pcs
Item Dimensions:11 x 4.3 x 1.5(inch)
Features:
1.Convenient ON/OFF switch design,enables you to use one side or two sides of the light independently.
2.Easy installation, snap out lens, no tools required.
3.Built-in constant current circuit board,can provide up to 60000 hours working life.
4.Environmental protection,no ultraviolet and red radiation.
5.Perfect for ceiling dome lights, porch lights, cabin lights, cabinet lights for RV, caravans, camper trailer, boat, etc.
Install Instructions:
1.Cut strip the shell of wire tail
2.Twist: rotate and tighten the wire core
3.Tighten: insert the wire core into the wiring cap, then rotate and tighten wire
4.Remove the light cover and screws to fix it, suitable for smooth surface Mounting
5.Install the lamp cover
Package Include:
5 Pack LED Double Dome Lights
10 x Wire Nuts
40 x Screws
Product Features
- High Quality:Made of high-quality SMD 2835 LED and imported ABS material, this double dome light has a good consistency light color, high luminous intensity, energy saving.
- Easy Installation: It has 2 two wires without polarity and comes with nuts and screws to hold it in place directly, suitable for smooth surface mounting.
- Convenient ON/OFF Switches Design: it adds great functionality to any area for lighting and it is widely used as perfect replacement light for Car/RV/Trailer/Camper/Motorhomes/Marine Boats
- Bright & Soft Lighting: 48pcs of LED light chip beads, 4000-4500K white light simulates natural light,the lighting is soft and not dazzling, which makes your eyes comfortable and will not be hurt by the light.
- Worry-Free Warranty:We back our lights with an 12-month warranty and promise quick respond customer support.
I installed one on the front wall one on each side wall and will probably install one on the ceiling in the back of the trailer. These were very easy to install. Tools I used were my wire strippers, Phillips screwdriver, drill with 5/16″ drill bit, scissors and electrical tape. I felt more comfortable adding a layer of tape to secure the basic wire nuts included as the connection just goes back into the wood panel ceiling.The three that I have installed are like daylight! If you have a cargo…
Comments are disabled for this post.