Specifications:
Light type:H4
Condition:100% Brand New
Light Color:6500K Cool White
Power:50W/Set(25W/each bulb)
Lumen:8000LM/Set(4000LM/each bulb)
Light Source:FOR CSP LED CHIPS
LED Quantity:12PCS-LED/Each bulb
Work Voltage(V):9V-32V DC
IP Rate:IP68
Heat Dissipation:Aluminum area integrated heatsink
Life Span:Over 100,000 hours
Guarantee:3 Years
Viewing Angle:360°
Working temperature:-40~80°C
Certificates:CE¡¢RoHs
Placement on Vehicle:Left, Right, Front
Size:SHOW AS PIC
Package included:
2x LED HEADLIGHT BULB
Product Features
- 6500K cool white light @ 8,000Lm (4,000Lms per bulb),50W(25W/each bulb),Compatible with H4
- Use Luxeon ZES LED Chip, Over 10,000 hrs of brilliant continuous light;
- All-in-One LED Headlight Bulbs,Easy Plug -N -Play Installatisn
- Works underwater! Rainproof , Shockproof, Solid-State, High Shock / Vibration Resistant LED drivers with over-heat protection .
- Order from NIGHTEYE Lighting for a truly worry-free experience! We offer free 3 year warranty and lifetime technical support.
Very good cost to benefit ratio!! Easy drop in install with decent performance at a great price! There are a LOT of HID/LED headlights available on Amazon. I was driving myself nuts over what to get to replace my low beams. HIDs? LEDs? etc etc. There is a LOT of information out there and you can drive yourself crazy and I did. What made me choose these over the rest were some key things.1. Pricing: These are by far the most economical LEDS out there, even cheaper than the best Halogen replacements.2. Design, these are an all in one plug and play design, My 2012 Camry Hybrid…
DID NOT FIT in the H7 housing. Mine came with only one light fully working. The other heat sync was loose and completely free to rotate so it was almost impossible to rotate the bulb into position in the socket. The light dispersal is okay at best. I think the LEDs are a little too far out for a factory H11 bulb, so the focal point of the light is off. In a projector housing it may not be an issue, but in a reflector housing, it was abysmal. I will be putting my factory halogens back in and sending this back and trying a…
Used these for the high beams on my ’08 Acadia. Did not fit in the H7 housing, had to Dremel out the bulb opening.Regarding the lights in general, they would be fine for low beams, but are far from sufficient for high beam operation. With that, I may buy a pair for the lows.***UPDATE***After a few weeks of using them for about a minute or so (because I couldn’t even tell they were on, that’s why I turned them off after a minute)…they melted in the housing. Sending…
Comments are disabled for this post.