Nordlichter H11(H8,H9)LED Headlight Bulbs Kit
– A completely retrofitted version with further-optimized headlight 360°angle beam pattern and outstanding cooling performance.
– The focal length of luminous filament is the same as your original halogen headlight. More focused lighting.
Specification:
*Model: H11(H8,H9)
*Voltage: 8V-48V
*Power : 80w/Set & 40w/bulb
*Actual Lumen : Up to 8,000 lms/Set & 4,000 Lms/bulb
*LED Type : ZES chips
*Color Temp: 6500K Cool White
*Waterproof rate : IP 67
*Shell Material : Aviation Aluminum
*Beam Angle : 360°
*Working Temp : -40°C – +80°C
*Connector Type: Plug and Play
*300% brighter than your stock Halogen headlights
*Life Span: Up to 50,000 Hours
*Socket Type: H11(H8,H9)
*Package: One Pair (2 pcs) Nordlichter LED Headlight + Manual
*Warranty: Come with 3 years warranty
Product Features
- ULTRA BRIGHT: Equipped with latest ZES LED chips. A new generation of LED technology.8,000Lm (4,000Lm per bulb) at Cool white 6500K LEDs emits a super bright and clear beam pattern without any dark spots or foggy light. 300% BRIGHT than standard halogen headlights.
- GREAT VISIBLITY: The beam pattern is aligned precisely.The ultra-thin LED design makes the beam pattern more focus.Avoid to blind the on-coming driver’s eyes.
- BETTER HEAT DISSIPATION: High-quality 9,000 RPM fan gel together with redesigned open aluminum alloy housing, providing superior cooling effect for 60,000 hours working lifespan.IP67 Water-proof, shockproof. No over-heating.
- EASY INSTALLATION: All in one style.Plug and Play.No extra driver. Built-in intelligent temperature control drive.CanBUS-Ready for most vehicles without error.
- WARRANTY: We offer 3 years warranty and lifetime support.Amazon filter system may not be 100% accurate.If you are not sure which bulb size that your vehicle requires,please check your owner manual or google “Philips automotive bulb look-up.”
Nice lights. Tundra owners are in for a little elbow grease I have a 2014 tundra Sr with the halogen reflector housings. As most tundra owners know the stock headlamps leave a lot to be desired. Install was fairly simple but not the quickest. Get your 10mm socket out and remove the four bolts that hold the grille. Pull the grille out one corner and a time. Then remove the push pins in front then the two bolts in the wheel well then the panels below the lights will come off. Remove the two bolts per headlight then pull the headlight down and rest it…
Not bad for the price
It is bright as promised and much much better than a halogen lamp
Comments are disabled for this post.