Functions as stop, turn and tail light.
Completely sealed and waterproof
Polycarbonate lens is sonic welded to the housing
11-diode square super bright LED lights
3 Wires
17” long (16 – 1/8” for mounting screws)
1 – 3/8 ” wide
1” height
SAE IST 06 DOT
Operates from 9~16 volts
Product Features
- MARKER OR IDENTIFICATION LIGHT, STOP, TURN, AND TAIL LIGHT
- COMPLETELY SEALED AND WATERPROOF
- POLYCARBONATE LENS IS SONIC WELDED TO THE HOUSING
- 11-DIODE SQUARE LED LIGHT
- OPERATES FROM 9-16 VOLTS
Wiring hookup White wire goes to ground ( any metal surface will work). This goes for both lights.****White wire from trailer connection also goes to any available ground.Black wire is for your running lights.****Black wire from both lights goes to the brown wire from the trailer connection.Green wire is for your turn signal and brake lights. Connect correctly the brake lights will also work.****One green wire from the lights goes to the yellow wire from the…
For those of you who can’t read All of these people saying there’s no color-coding on the wires. First of all, you don’t know trailers, the wires are standardized across the industry for trailering. Secondly, READ the inside of the circuit board, inside the red lens, at the bottom of the LED board, centered on the light strip. In PLAIN ENGLISH it tells you what the different colors are, you just have to actually look at the product to find it, instead of glazing it over it and fiddling through the box for idiot-proof…
Comments are disabled for this post.