(2) Red Amber LED Side Marker Clearance Trailer Fender Lights
(2) Bright Red and Amber LED Trailer Fender Marker Lights . Wonderful and perfeft lights to mount on your truck or trailers side fenders . These are right fender mount clearance lights with amber Clearance light facing forward and red Clearance light facing backwards. They are fully assembled, wired and are secured by 3 screws. These units measures 4″ wide, 8 1/4″ long 1 3/4″ high approx. . The LED lights are 3/4″ by 4″ approx. and have 7 LED’s in each light. These Lights are impact resistant and less susceptible to shock damage. Each LED is directly wired and water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb. 12 Volt Input.
Package included:
2 x Fender Lights Assembly Right
Product Features
- Red Amber LED Side Marker Clearance Trailer Fender Lights; Wonderful and perfect lights to mount on your truck or trailers side fenders .fender mount marker light
- mount on your truck or trailers side fenders; easy to mount, easy to connect; perfect replacement for an enclosed trailer fender lights; Day and Night they are visible which make for safer traveling;
- right fender mount clearance lights; this is only for the right side; Each light is on a black, molded plastic bracket.great replacement for traditional light units on trailer;
- amber Clearance light facing forward and red Clearance light facing backwards; for trailer applications more than 80″ wide; fender marker lights;
- assemblied,4″ wide, 8 1/4″ long 1 3/4″ high approx; LED Qty: 7 Diodes on each light.The LED lights are 3/4″ by 4″ approx.Each LED is directly wired and water-tight sealed.
Very nice replacement product. The quality is very good. They are big enough to be easily seen and quite bright. Through my own mistake, I ordered thinking they were a left/right pair rather than two identical units. This was not a big problem as the elements are held in place by two screws which made it easy to swap red & amber positions on one to give me a right/left pair. I needed to cut off the connectors anyway to use my own crimp splice fittings (I was replacing existing defective marker lights), so nothing…
Comments are disabled for this post.