Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light Kit 49 LED with White Base Waterproof 12V Sealed with Reflex Lens Surface Mount (Left + Right)

LEDdistributors • 5 years ago

Features:

22 Red Diodes LED Stop Turn Tail Light-Curb Side

27 Diodes ( 22 Red++5 White ) LED Combination Stop Turn Tail Light-Street Side with License illuminator

High Visibility Safety Lights are easy to mount

Add or upgrade the lights on boat, snowmobile, RV, camper, or utility trailer

Polycarbonate White Base with 4 Mounting Holes For Secure Installation.

Mounting Holes are Approx. 7″ by 2 1/2″ Apart.

Polycarbonate Red Lens with Reflex Design For Added Visibility.

Removable Lens For Bulb Replacement

Base Measures 8 5/8″ by 3 7/8″.

12V Input.

Wire Connecton Tips:

White Wire-Ground, Black Wire-Tail Lights, Red Wire-Brake/Turn Signal Lights. The License Plate Light light up When Tail Lights are on.

Package include:

Pair of Surface Mount LED RV Camper Tail Lights with White Base and License Plate Bracket.

8-5/8″ x 3-7/8″ Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on RV CAMPER TRAILER. At the bottom of the left hand driver’s side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.
left hand driver’s side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger’s Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there’s not bulbs to replace, or not brittle filaments.
It is designed to mount on the surface of a trailer RV and Camper etc.; there’s three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.
Dimension: overall length: 8 5/8″, The height: 3 7/8″ and the total depth is 1 3/5″; Mounting Holes are Approx. 7″ by 2 1/2″ Apart.
Easy Installation: This light is Surface mount, which means that it installs flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.