Features:
Continuous length, packed with 10 meter,
Cuttable every 3 LEDs along the cutting marks, according to requirement.
Long life span 50,000+ hours
Flexible ribbon for curving around bends
Completely smooth and even light spread, solving the uneven luminous problem
Application:
Widely used for home decoration, hotels, clubs, shopping mall
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Back Lighting, concealed lighting, channel letter lighting
Emergency &Lamp; security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile and bicycle decoration, border or contour lighting
Description:
LED Type: 5050 SMD LED RGB, Non-waterproof
Length: 32.8FT (10Meter)
LED Quantity: 300LEDs / 32.8FT
Beam angle: 120 degrees
Input voltage: 12V DC
Output power: 60W /10 Meter
Working Tempreture:-20 to 50 degree celsius
Size: L 32.8ft x W 0.40inch x T 0.10inch
Can be cut 3 LEDs per Unit
Suitable Power Supply: 12V/5A or more
HOW TO USE DIY:
1. Press a DIY button, for example DIY1.
2. Hold one of the down colored arrows for about 8 seconds until you notice a change. Then try holding down another arrow. The DIYs start out as white because white is made up of RGB. The arrows essentially add or subtract color.
3. After you have the desired color, press the same DIY button again to save it. To cancel the change, press another DIY button instead.
Package Contents:
1 x 10m 300LEDs Non-waterproof LED Strip
1 x Remote Controller
1 x IR Control Box
1 x 12V,5A Power Supply
1 x Controller Operation Instructions
Product Features
- High Quality : RaThun ORIGINAL 5050 SMD TYPE continuous 10 Meters/ roll.Using adhesive 3M backing, super viscosity,12V double layer copper on PCB board to keep the mixed colors more even.
- Rich Color : Not only RGB(Red,Green,Blue),16 multi-colored options, but also has DIY selection to create your own color,Led IR remote controller with over charging and short circuit protection, memory function.
- RGB Rope Light : Has 300 Non-waterproof 5050 RGB SMD Leds in 32.8ft with dimming and brightness controls, suitable for indoor lighting and decor.
- Easy Installation & Longevity :This led strips can be cut between every 3 leds, self-adhesive tape backing can be fit many dry flat surface. Reduce re-lamp frequency. Lifespan is over 50000 hrs.
- Full Kits : Including 10 meters continuous RGB LED Strip, 12V,5A Power Supply, RGB Control Box, Remotes controller.
Under cabinet lights This is an interesting application for LED lights. They are arranged on a flexible strip that you can cut to length. The backing of the strip has adhesive that is basically peel and stick. I plan to use these as under cabinet lighting. You just need to find an outlet to power them and have access to the included IR eye. The controller works well and there are a number of different lighting effects that I cover in the video. I do wish there were more…
Dimmable LEDs with lots of color options to create some serious mood lighting This LED strip with remote makes for some nice ambient lighting. It’s also very versatile, seeing as it has a large color selection and dimmer function, you can really control the vibe you want.** PROS ** * These LEDs are dimmable. Control the level of lighting and ambience. The bright colors can be a bit overpowering at 100% brightness. * A large selection of colors for the right mood. Or go white light for a professional look. * Set up is easy, and the strip has…
Comments are disabled for this post.