LED Type: 5050 RGB SMD LED
Quantity: 300 leds / 5 Meter
View angle: 120 °
Working Input Voltage: DC12V
Working Temperature: -20 ° ~ 60 °
Power: 35-40W
Long life:> 100,000 hours
Led strip light type: RGB
Waterproof level: IP65 Waterproof
Chip: 30pcs RGB chip + 30pcs white chip
Features:
Superbright 5050 RGB LED Strip Light, high intensity and reliability.
Continuous length, packed with 5 meter, every 0.25 meter as a sell unit.
Back with a self-adhesive
Cuttable every 3 LEDs along the cutting marks, according to your requirement.
Completely smooth and even light spread, solving the uneven luminous problem
Ultra-bright but running at low temperature
Certification CE & RoHS
Low power consumption
Product Name:RGB+CCT Smart LED Control System
Working Voltage: DC12V~24V
Output Max: 6A/Channel
Total Output Max: 15A
Working Temperature: -20~60℃
Max Controlling Distance: 30m
Output Connection: Common anode
Controller Size: 37*28*97mm
Remote Size: 47*16.5*134mm
App download:
Search “Milight” from App store, or scan the code shown on the below .
Search “Milight” from Google Play store, or scan the code shown on the below (Android 4.3 or above).
Smart Configuration:
1.Open WLAN via mobile phone, connect to the wireless Router
2.Press” RST”( The SYS indicator light flickers, the Link indicator light flashes)
3.Open Mi-light App, Press+ to start Configuration.
4.Type in your wireless password, press ” Start configuration”
5.After the configuration is successful, return to device list , click to search device , then you can control it through the phone .
Package Include:
4 rolls 5m IP65 RGB Led strips
1 X 20A power supply
1 X Mi Light RGB controler with remote
1 X 1to4 4pin led connector
1 X DC led connector
1 X US Plug Cable
Product Features
- ❥Timer function: press 60S/10Minutes delay off,the light will be off automatically after 10 second or 10 minutes. ►2.4Ghz RF controllable. Color changing & Saturation controller Dimmable & Color temperature. Wireless intuitive touch remote controller, effective receiving distance nearly 30m.
- ►Low power consumption,Super-bright but running with low temperature.► One US Plug Cable in the Package.►Batteries are not included in package,please prepare it before using.We suggest you use rechargeable battery for our environment.You can charge it with this charger: ASIN B01MPXZHOQ
- ►(Asin: B07928VWKV ): Wifi Smart Plug Works with Alexa and Google Assistant.►Smartphone APP controll.You can use the Wifi box(asin:B01KXJ3RWU) .No matter you are working,on business,travelling ans visiting,you can control you home light if there is WIFI/3G/4G Internet. Compatible with ISO, Android 4.3 or above.
- ►Emergency & security lighting, advertisement sign lighting. ► Application: Widely used for home decoration use, hotels, clubs, shopping malls Architectural decorative lighting, boutique atmosphere lighting Extensively applied in Backlighting, concealed lighting, channel letter lighting.
- ❥Please pay attention: every time to try link/unlink first power off ,then power on. To link/unlink it in 5 seconds(Press link/unlink button 3 -5 times shortly). If the operating time over 5 seconds(link/unlink failed) please power off ,then power on to try it again .
The Mi-Light Cloud App or Alexa skill needs some work to enable all features. Using with the 5 in 1 WiFi LED Controller Model# YL5. It has 5 individual outputs, which from the Amazon listing could be used in 5 different ways. (Work with Single color/ CCT/ RGB/ RGBW/ RGB+CCT LED Strip) This seemed preferable over the LS2, which had the same features except you needed to purchase an additional Wifi box to control it. It took hours to get the app to connect to the controller. There is very little in the instructions to help you. The app is very poorly translated from…
Good with Caveats These work in boosting the signal, but I ran into a huge issue running the amplified signal in series. My run was 150Ft with about 9 LED strips in total. Every time I amplified (at the end of each 16.4ft strip), the strip and color would increase more than what it started out with. By the end of the run, the strip could only dim to about 70% of max brightness, and color changes were incredibly sensitive. To solve this, I ran a signal wire parallel to the run so that each amplifier would get…
Lets you daisy chain multiple RGBW LED strips without losing brightness
Comments are disabled for this post.