){kind=link}
Quantity of LEDs: 21 individual pieces
LED Chip Type: 2835 SMD
Operating Voltage: 12V-24V
Beam Angle: 360 degree
Bulb Size: 1156,1157,7440,7443 or 3157 (please make sure you are ordering the correct size for your need)
Color Temperature: 6K pure bright white, amber or red (please verify that you are ordering the correct color for your need)
Light Output: 1200 total lumens with projection technology
Easy plug-and-play installation, Compatibility on standard sockets only (not polarity sensitive CK sockets)
Multiple fitments including: tail lights, reverse lighs, turn signals, DRLs and brake lights (dual brightness function)
Quality built aluminum circuit board with efficient heat disbursal made for longer LED lifespans
Product Features
- -This set of lights come with 2 bulbs made with bright 2835 SMD LED chips
- -Lights produce 1200 total lumens of pure white light output with projection
- -Available in sizes 1156,1157,7440,7443 and 3157 made for many applications including: tail lights, reverse lights, turn signal lights, daytime running lights and brake lights (dual brightness functionality)
- -Upgraded aluminum circuit board makes for better heat dissipation and light stability compared to fiberglass
- -An important feature of these LED bulbs is the versatility to be installed on standard sockets only (not polarity sensitive CK sockets).
Related Posts
YITAMOTOR Red 24 Inch Flood Spot Combo LED Work Light Bar with Wiring Harness for Offroad Driving Jeep SUV Truck Car ATVs 4×4 4WD Boat 120W Stay All Night Bright with the […] Posted in LED Bar Lights
Tuscom DC 12V-24V 8A Automatic Infrared PIR Motion Sensor Switch For lighting light New
Feature:
100% brand new and high […] Posted in LED DC Bulbs
3″ LED IC Rated Dimmable Downlight Swivel Spotlight Recessed Lighting Kit, White Finish, Easy Install Push-N-Click Clips, (1-Pack), 1x LED Bulb Included, Globe Electric 90717 Globe Electric's 3" LED IC Rated […] Posted in LED Lighting
Then I got red ones and tail lights look nice with a bit more deeper red than with stock … Brighter than halogen. No Can-bus error. Using them on tail lights of my 2006 Audi A6. At first I tried to use white LEDs. Tail lights looked orange due to color temperature of white LEDs in combination with red color of tail lights. Then I got red ones and tail lights look nice with a bit more deeper red than with stock halogen. On my tail light setup with 3 bulbs, I was able to light only 2 LEDs. For some reason the middle bulbs would not light on both of my tail lights, only flash a few…
Very bright, high quality bulbs.
Comments are disabled for this post.