LED Lighting Distributors

Solar light instructions:

1. Solar lighting products are the same principle, is the use of solar panels to absorb light energy, the light energy into electricity to the battery charge, and then use the battery power to drive LED light. When there is no light when the solar panel no voltage output, the circuit once the detection of no voltage input circuit to start the battery circuit to the LED power supply.

2. Solar charging effect depends on the intensity of light and the time of exposure. The stronger the light that the solar panel is exposed to, the greater the amount of charge that will be charged. Therefore, we must put the solar lights installed in direct sunlight and sunshine long time to play the effect.

3. Installation height and sensing distance: suitable for installation height of 2-4 meters. The higher the installation area, the larger the area of exposure and the greater the sensing range.

4. Products before the factory power is very small, standby static power consumption, please use the first day before charging.

5. When testing, please cover the solar panels on the desktop and then test, if the detection of solar panels have light, LED drive circuit will be closed without lighting.

6. When the light flashes, it indicates that the battery is low and the charge is required to return to normal.

7. In winter or sunny or light time is short, it is recommended to use the sensor without micro-bright mode.

8. All places are not recommended to use the normal mode, only bright mode only applies to special circumstances.

9. Storage is not used, please remember that every month need to charge the lamp one day, to prevent the battery loss and damage.

Product Features

• ♚ Daytime charging and storage, night lighting
• ♚ Daytime charge for more than 10 hours of lighting
• ♚ Waterproof grade IP64, heat resistant and durable
• ♚ Intelligent environmental protection and energy conservation
• ♚ Human body sensing and light control sensing combo design