){kind=link}
Specification:
– Color: Warm White
– View angle:120
– Diameter: 177mm
– Witdth: 10mm
– Weight: 260g
– Working Tempreture:-20 to 60
– LED Quantity: 300 LEDS / 5 M
– Waterproof Rate: IP65 Waterproof
– Working Voltage:12V DC(12V 5A for 5M 5050 300LED)
Applications:
* light up colorful home life ,DIY household lights for hallways, stairs, trails ,windows
* Light up colorful life hotels decoration use,Theaters, clubs, shopping malls, festivals and performances
* Architectural decorative lighting,Archway, canopy and bridge edge lighting, Security lighting and Emergency
* Extensively applied in Backlighting for signage letters, concealed lighting and advertisement sign lighting
* Applicable for automobile & Airplane model decoration, contour lighting or border.
About SMD 5050 LED Flex Strips:
* SMD 5050 : the dimensions of the chips are 50mm x 50mm.
* These LED chips have 3 LED chips in one housing (sometimes called tri-chips), and are a lot brighter than 3528 LED chips.
* They are used when you need high illumination for your project area.
* Theoretically, SMD 5050 LEDs can offer a light output 3 times that of the 3528 strips
* Therefore the 5050 LED is well suited for lighting up areas that may be subject to high levels of ambient light.
* Though they produce more heat, it is still drastically lower than other lighting options.
Package include: (Note:Power supply not included)
1 X 5 meter Warm White roll led strip
Product Features
- 【SMD 5050 LED Rope Lights】There are 300pcs leds on 16.4ft flexible board.On the back of tape,there is double-side adhesive tape which can help you install it easier. This SUPERNIGHT strip can work with 12V 5A power supply/dimmer (Not included).
- 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request;Also you can use other strip tools to connect more strips.
- 【IP65 waterproof PCB】This 5M length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to protect LEDs against multi-directional, low-pressure water jets.
- 【Easy to instsall】Strong adhesive tape on the back of the tape can help you easy to install the strip. Please make sure the surface is dry, smooth, no dust.
- 【4000K Temperature VS 3000K Temperature】Our this warm white strip with 4000K Temperature will be brighter than LED strip with 3000K warm white strip.
Related Posts
LED Grow Light 600W – Carambola Full Spectrum Growing Lamp for Hydroponic Indoor Plants Veg and Flower
Product Feature: New 10W double […] Posted in LED Grow Lights
Sanniu G4 Base LED Bulb Halogen Replacement 48 LED 3014 SMD Dimmable 1.8W DC 12V 160LM Bright G4 LED Lights Bulb Lamps Warm White 6 Packs Feature: ☞Brand new and High quality. […] Posted in LED DC Bulbs
Kensun New Technology All-in-One LED Headlight Conversion Kit (from HID or Halogen) with Cree Bulbs – 9007 Dual-Beam – 40W 4000LM x2 – 2 Year Full Warranty Kensun's new LED Headlight Conversion […] Posted in LED Headlights
Lousy self adhesive on back. Use a stand alone power supply to drive these lights. Used these under the steps on my RV and they help light the stairs at night. Perfect but the adhesive tape on the back isnât strong enough to hold. I used an additional tape strip bought separately right onto the original sticky back of these lights but they should be shipped with real 3M tape so they stick once installed. If you order these, do not rely on the included self adhesive back. Use additional glue or better yet buy yourself an additional double sided tape made by 3M and apply it to…
Very good quality leds and great price too! Iâve bought a lot of led strips over the years and the ones from this company always work 100%. I would and will continue to only buy from them. My last purchase was for all blue and ordered 5050 bright waterproof. 7 rolls at 5 meters each. All still look perfect. Put 4 under chassis of my motorhome. Looks amazing and very bright. I suggest to anyone not to except the tape to hold other then for glue to dry. After you place them make sure to use clear silicone caulk smeared in down both sides…
I would recommend the reel LED strip lights over the pre-cut one …
Comments are disabled for this post.