Tailgate Light Bar, AAIWA Truck Bed Light Strip with Red Trun Singal, Brake, Reverse, Flash Light, Amber/Red/White Tail light Strip for Pickup Trailer SUV RV VAN Jeep Car
LEDdistributors • 5 years ago
Product Features
- 60 Inch LED Truck Tailgate Light Bar – Adopt 405pcs 2835SMD LEDs and triple row design, which makes the lumen output is more brighter. Low power consumption protects the car circuits. Life span up to 50,000 hours.
- 6 Function Lights – Upgraded LED light strip tail light can be used as running light, brake light, left turn signal, right turn signal, warning and reversing light, increasing visibility and driving safety.
- Easy to Install – No screws and brackets, just tear apart and stick on your pickup. Standard 4-pin flat plug and self-adhesive tape can be easily stuck on any smooth surface. Just press on your tailgate, and will not fall off.
- High Quality – Made of durable dustproof flexible substrate and filled with watertight silicone, withstands up to 50lb of weight. IP67 waterproof, can work in rain or snow.
- Wide Application – Working voltage of DC10V-16V, suitable for most pickups, trailers, truck, towing vehicle, cars, SUV, RV, VAN, etc.
Good value, odd color output I bought these to add some work lighting to my semi trailer. I’m giving them 3 stars for a couple reasons. The first is that there is no way they are 6000 lumens. A 35w HID headlight is around 3200 lumens, and these do not approach that. My seat-of-the-pants rating puts these at around 1600 to 2000 lumens each, about on par with a halogen headlight. The second issue is the odd color of the light they put out, which is slightly green. In the picture taken from the rear of the trailer you can see…
Doing exactly what I wanted them for I purchased these to mount on my lawnmower. It gets rather hot around here in the summer time and, not being a big fan of heat stroke, I wanted to be able to mow the yard at night. The mower came with the customary headlights, but they did not provide the ability to see on either side to get up close to objects.The packaging of these lights was nothing fancy, but adequate. They were provided with the mounting hardware and about a 4 inch wiring pigtail. If you are going to need…
Nice lights, but the mount limits motion or position Everything looked good until I went to mount the lights. There was no way the included mounting would let the lights be mounted with the power cord hanging below the light.”Hanging below my rear bumper” The mounting nuts are “Installed” on only on the bottom of the light with the power cord in the down position, and can’t be moved except sideways. Look closely at the mounting bracket before you buy. The bracket is slotted but only has a small range of motion compared to a universal stud mount…
Comments are disabled for this post.