![[Upgraded] Luxx ES Series – 80W All-in-One 360° LED Kit – Cool White 6000K 6K – Low Beam – 9,000 lm – 9006 / HB4](https://images-na.ssl-images-amazon.com/images/I/51I0cIwRbbL.jpg "[Upgraded] Luxx ES Series – 80W All-in-One 360° LED Kit – Cool White 6000K 6K – Low Beam – 9,000 lm – 9006 / HB4")
){kind=link}
OPTIMAL LIGHT PATTERN:
LED headlight using the latest COB-Flip Chip hybrid for best beam patterns. No dark spots, no scattered light.
LIMITLESS TURBO FAN
With speed up to 8,500 rpm, it delivers over 7CFM of air flow, keeping to the temperature under 85
INSTANT BEAM
Unlike HIDs which take 6-8 seconds to light up making its use for high beam irrelevant, LEDs provide you with a bright beam as soon as you turn the lights.
BRAIDED CABLE
Its new Nylon braided cord, tangle free and robust, will allow better flexibility and longer lifetime.
WARNING ABOUT POLARITY:
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
– if your light turns on, please proceed to install both bulbs onto your vehicle.
– if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
DISCLAIMER: SOME VEHICLES REQUIRE ADDITIONAL HARDWARE (DECODERS OR RESISTORS)
– European Vehicles 2005 and up
– Dodge/Chrysler 2005 and up
– Jeep 2008 and up
– Ford 2013 and up
For those vehicles, please contact our Customer Service Department for further assistance.
Note: HID relay and resistors will not work with LED kits.
Product Features
- BETTER VISIBILITY: Bright 6000K light and 9,000 Lumens per kit – No dark spot, No scattered light
- LONGER LIFESPAN: Braided cord, Advanced LED chip along with new Turbo Fan provide over 50,000 hours
- PLUG’n PLAY: All you need to upgrade your 9006 / HB4 Lights
- DISCLAIMER: Some Vehicle REQUIRE Additional Hardware, please check the list for those cars below.
- 2 Year Warranty / Lifetime Support
Related Posts
NPAUTO 2Pcs 6″ Oval Trailer Tail Lights 24 Red LED Stop Turn Brake Lights Waterproof Flush Mount Tail Lights for RV Jeep Truck NPAUTO 6" 24 LED Oval LED trailer […] Posted in Automotive
Led Strip Lights Sync to Music, Tasmor 32.8ft 5050 RGB Light Color Changing with Music IP65 Waterproof LED Rope Light with Controller for Home, Room, Bar, Party 16 Color LED Strip Light Bring You […] Posted in Rope and String Lights
2 Pack 30 LED Solar Lights Outdoor, Avaspot【Upgraded Version】Solar Powered Security Light, Wireless Waterproof Motion Sensor Solar Light, Outdoor Wall Light for Patio, Deck, Garden, Garage Avaspot Features:
** 30 LED design […] Posted in Solar Lighting
Great ubdate, as good or better than HID I have been running these for a little while now in my 2001 Dodge 2500 and wanted to wait to write a review so I could see how they do out on the road and I simply have nothing bad to say about them at all. The 2 piece design works great and allows the retaining ring clip to fit in perfectly behind the built in fan for the bulb. (When installing them just pay attention to the positioning of the stock bulbs alignment slots so you can align the slots on the new LED bulbs) They snap right in to…
Very bright, but not durable or built to last I purchased a pair of these for my fog lights about six months ago. Already one of the lights has died, and the other one flickers when my lights are on. Doubled checked all the connections, but these LEDs haven’t lasted very long compared to the ones from another brand that I use in my low beamsUPDATE (3/5/2017) – customer service reached out to me about a replacement. They seem willing to send a replacement under warranty. Will update this review as we go through the process…
Comments are disabled for this post.