New Weather-proof, Round, Clear, PVC rope … with Long-life, Cool-burning, Energy-saving, Sub-miniature, LED bulbs. Flexible to bend into shapes. No Flicker/Smooth Glow. Can be cut every 1 meter (3.28 ft.). Easily Installed. For Indoor or Outdoor use. Used for anywhere LED lighting is needed such as Decorative Lighting, Sign Lighting, Corners, Ceilings, Staircases, Decks, Driveways, Galleries, Clubs, and Parties. True Colored LED’s in a Clear PVC Rope. LED rope and the LED lights inside the rope are clear when unplugged and light up the color when plugged in. The LED’s are not coated with a colored plastic like many other LED rope lights you will find out there. They are true LED’s that get their color from different gases inside the LED. This process is more expensive but it gives you the brightest, most vibrant colors. IMPORTANT: The PVC rope lights alone are weather proof. However, the area where the rope lights attach to the power cord, the power cord itself and the end cap are not weather proof and should never be exposed to the weather unless it has been properly weather proofed by a licensed electrician. It is the responsibility of the buyer to make sure the entire length of the rope lights and the power cord is properly weather proofed should these light be used outdoors or near any water/moisture. Please keep in mind that the PVC rope that the lights are encased in can be cut or damaged in many ways including but not limited to stepping on them which would expose electrical wires and cause a potential fire hazard should moisture get near the damaged area.
Product Features
- LED Round Rope Lights – 150 feet with power cord and end cap attached. Ready to plug into your standard North American wall outlet right out of the box.
- Length is 150 feet, LED bulbs spaced every 1″
- THESE LIGHTS HAVE HORIZONTAL LED BULB ORIENTATION! Rope Light Diameter 3/8″, Power Cord Length: 47″
- Power: 110 Volt – 120 Volt, 0.00457 amps per foot / 0.503 watts per foot
- Life: 100,000+ hours, BLACK SPOOL IN PICTURE MAY NOT BE INCLUDED!!!
Observe polarity when splicing I used this light the in the crown moulding of a nine box coffered ceiling. I used light connectors from another supplier that fit 3/8 inch rope light with no problem. The rope light was cut into nine individual lengths without a problem. The rope light is also dimmable without issue using a Lutron dimmer control designed to be used with CFL bulbs. One thing to note when splicing this rope is that the direction of current flow as well as polarity must be observed for the lights to work even…
Great product.
Comments are disabled for this post.