APPLICATIONS: Aftermarket LED Headlights Replacement HID/Xenon/Halogen Headlights
Advantages Compared to Halogen or HID bulbs:
a. Fast ON or OFF, NO warm up
b. Enery Saving, Much less power consumption
c. No Ballast, safe for driving
d. Good Cooling, Thermal Conductivity
e. Upgrade Light Distribution
Package Includes:
2 x LED Lights
1 x Manual
Note: Pls make sure the bulb size you choose is the right one for your vehicle before purchasing
LED TROUBLESHOOTING GUIDE
Q1.Do NOT Light Up
After installing the LED Kit,they do not turn on.That may be a problem of Reversed Polarity.
Q2.Headlights are Flickering
LED lights may flicker on some vehicles, that caused by the vehicle onboard computer failing self-check test due to the NEW Led Kit you just installed. This can easily be corrected by adding a set of waring cancellers(capacitors) to your setup.
Q3. Only one side is working on my LED KIT
If one side sometimes does not turn on it could be caused by a bad bulb, led driver or wiring. To help identify which component is defective follow these steps.
If one side did not turn on, it could be caused by a defective bulb, LED driver or wiring.
a.Defective Bulb
Swap the LED Bulbs to opposite side.Still does not work,the bulb you have is a defective one.
b.Defective LED Driver
Swap the LED Drivers to opposite side.Still does not work,the driver you have is a defective one.
If none of these helped, please check the wiring make sure it is connected properly.
Product Features
- Fast ON/OFF, NO Warm Up, Water Resistant
- Socket Type: H4; Life Span:>30000hrs
- Expediting your heat dissipation to a more stable light with advanced Aviation aluminum 6063 heat dissipation material and specialized Cooling fan — isn’t that loud,not even noticeable while running or driving
- LED CANBUS — would be NEEDED for below vehicles: All European Vehicles 2005 and up: including but not limited to Audi,BMW,Mercedes,Land Rover, Volkswagen, Volvo and Mini; All Dodge and Chrysler 2005 and up;All Jeep 2008 and up;All Ford 2013 and up. PLEASE BUY HALOGEN INSTEAD!!!
- Sold as a pair,Manual included; Check out DESCRIPTION for more info
Superior Improvement I own a 2013 ford fusion. Polarity is backwards. This means that when you plug them in the correct way to where the male and female parts snap together, the lights will no work. If you turn the connector the other way the lights work but both connectors do no snap together correctly. thus leaving the possibility of it coming apart with vibration of the car. I placed some electrical tape around the connectors to hold them together. So far so good. The lights are bright and fit into the headlight…
Five Stars
Comments are disabled for this post.