Description:
Color : Warm White
Made with high intensity SMD LED
Number of SMD:18 (5050 Chip)
Cross Reference : 1156 BA15S = 1073 1093 1129 1141 1159 1259 1459 1619 1651 1680 3496 5007 5008 7506 7527
Applications : Tail lights, Turn signal light, Corner light, Parking light, Side marker and Backup lights
Save energy, Simple fit
Low power consumption and high brightness
Pure white SMD LED’s
Long service life
Easy to install
An aggressive, yet clean & stylish LED lights, enhanced the outline, make your car stands out in the crowd.
Power: DC 12V
Package Content:
10x 18-SMD LED Car Light Bulb
Product Features
- Inpute Power: 0.17A @ 12V(About 2W),Voltage: DC-12V~14V
- 1156 BA15S S25 Base, Popularly known as 1156 or 1141 Base(TWO PINS 180 degrees opposite, at the same level, at the top on the base have only one contact point)
- 1156 BA15S Sockel (P21W):1073 1095 1141 1156 1156A 1156NA 1195 12088 1295 1295NA 199 2396 3497 631 7506 93 97 97A 97NA
- Point to point welding, the light body is firm and durable
These lights are actually better than I expected These lights are actually better than I expected. All 10 worked upon arrival. I replaced the most used lights in our camper (bathroom, kitchen sink and reading lights in bedrooms). They are a little bit dimmer but entirely acceptable. The light is warmer than many LEDs, not the sterile white or bluish white I’ve come to expect, more like regular incandescent bulbs. Previously our converter fan would turn on with more than 5 lights on after 3 or 4 minutes. I had all 10 lights running for over 30…
Great color light only a .15amp drap per light. The short….Wow. Pretty amazing. I have been so nervous on buying LED lights for my RV because I didn’t want to live in an harsh blue glow of some LED lights that are freaky. These are not the case. The have a nice glow that is not that different from normal old style bulbs. You can stop right here and buy them…. Nice color and I would guess about 15% dimmer than normal bulbs. But that is just fine because the old style bulbs were just tooooo bright to use in my rig…
I have one that does not work (looks like a loose wire in the housing) and contacted the …
Comments are disabled for this post.