Detail:
– Lens on LED: Helps to gather the light, create perfect beam pattern without any dark spots or foggy light.
– Ball bearing Fan: 12,000rpm;
– Heat radiation Aluminum and Copper part, improved the efficiency of heat – dissipating.
– Constant current driver: Smart IC monitor fan speed for protecting the LED chip working safety and prevent damage from Voltage variations & spikes.
Warranty: 12 months
Specifications:
Socket type: 9006 (HB4)
Power: 64W/set (32W/bulb)
Operation Voltage: DC12V-24V
Input Current: 2.6A ± 0.2A
LED Quantity: 2/set CREE LED
Lumen:6,400/set
Beam angle: 140°
Color Temperature: 6,500K
Waterproof Rate: IP65
Cooling system: Fan active cooling
Heat control: Ball bearing fan
Fan failure protection: Yes
Operation Temperature: 40-80°C
Material: Aluminum
Life Span: 50,000 hours
Package included:
2 x LED Headlight bulbs
2 x LED Headlight Driver
User Manual
Kindly Note:
1. To make sure this bulb can fit your car, please check the follows.
a. See the Car’s Owner manual or Sylvania’s Automotive Bulb Replacement Guide (http://www.sylvania.com/en-us/applications/automotive-lighting-systems/Pages/lrgmain.aspx) to confirm compatibility.
b. Please check the size of the bulbs to make sure they can perfectly fit your car.
2. Few vehicles may need a Error Free Plug/ Decoder to work with the bulbs
Product Features
- 9006 LED headlight kit: Cree LED headlight bulbs. Cool White 6500K. Power: 64W Lumen: 6,400 lumen.
- Special design LED kit with lens on it, gives better performance in beam pattern even in rain and fog weather. NO HARMFUL and hurt for other drivers when pass them or crossing.
- Ultra bright LED Headlights lamp for cars and trucks, which can replace HID Xenon and traditional Halogen Lamp.
- Excellent heat dissipation & Plug – Play: efficient aluminum radiating fins and built-in cooling fans, over 50,000 hrs of brilliant continuous light. Easy to install within 20 mins like OEM parts, simple and quick installation.
- Energy-saving & Weatherproof: lower power consumption and higher energy conservation. Works underwater, housing / heat dissipation works even in extreme situations. 1 years warranty.
Deliver as promised Sooooo much better than the halogen bulbs they replaced. The light output is equal to the light output from the stock HID’s on my Audi, although not as focused. Although the product listing on Amazon said there was no glare, they do throw off a little more glare than the halogen bulbs they replaced and I am probably going to have to lower my headlight aim a little bit, although no one has flashed me yet. That’s the only reason they got 4 stars instead of 5. Other than that, they are WAY…
Is This For You? A conventional H13 9008 is a dual filament lamp. The low beam filament bounces off the top of the reflector to illuminate the roadway. The high beam filament bounces off the bottom of the reflector, to throw the beam straight ahead.Your mileage may vary. Depending on your headlight, you will get different results. Any time you place an LED light into a housing designed for halogen, you will not have the same lighting effect as OEM. LED light housings have a different reflector…
I was very excited to get these bulbs, but unfortunately I think I got a set that were assembled wrong. As with another reviewer, the low beam should be on top and the high should be on bottom, but mine are upside down where my low beams point to the sky! THIS IS NOT A HEADLIGHT AIMING ISSUE. These are manufactured upside down, and they lock in at an angle. This is incorrect. They should be horizontal, not angled! Quality and output of the lamp itself is stellar, but the way its…
Comments are disabled for this post.