){kind=link}
Specifications
Color: Amber
Voltage: 12 V
Package Weight: 22 ounces
Each Size: 6.5 * 2* 2 inches
Each LED Power: 1 W
Ambient Temperature: -40 ~ 40 Celsius
Number of LED: 6X LED (Each Light)
Line Length between Light Blocks : 47 Ins
Switch Line Length: 110 Ins
Total 9 Flash Modes & Last Memory Recall:
1. Keep Steady
2. Sync strobe
3. Sync flash
4. Cross strobe
5. Cross flash
6. Sync flash and then sync strobe
7. Sync strobe and then sync flash
8. One lights on one second while the other strobe
9. Automatic cycle
How to Install
Professional installation is highly recommended.
Modification may required for some models.
Two Wires Connection: Red for Positive, Black for Negative.
Exchange button to change the pattern,switch button to turn Off / On.
Product Features
- Enhance Version: Add steady mode so you can keep lights on. Total 7 flashing patterns.
- Super Bright: High intensity LED Chips optical lens, driving at night can be seen clearly light beam with meteor-like brightness.
- Easy Control: with inline on/off and flash change switch. Low consumption helps save your power supply.
- Equipped with mounting brackets and screws to connect to grille or bumper. Can be installed in any place you like, such as roof bar, bull bar, roof rack and so on.
- Note: just surface waterproof, can not be completely immersed in water.
Related Posts
BDK PolyCloth Black Car Seat Covers – EasyWrap Interior Protection, Black Add A Layer of Comfort & […] Posted in Light Bars
Wolo (7900-A) Lookout GEN 3 Technology Low Profile LED Emergency Warning Light Bar – 12 Volt, Amber LEDs, Clear Lens, Roof Mount The Wolo 7900-A is designed with a […] Posted in Light Bars
AUDEW 2X 12V Rear Stop LED Lights Tail Indicator Lamp Trailer Caravan Truck Van UTE Description:
100% brand new.
High […] Posted in Automotive
Not as good as it could be. For starters, these strobe lights are by no means “waterproof” or even “weather resistant” for that matter. There is no weatherproofing seal on the plastic lenses, the circuit boards are not conformal coated, nor is there any sealing around the wiring that runs into the housings. Secondly, I highly doubt that the LEDs are 3w LEDs as described; I will be testing them shortly to make sure and will update my review to reflect my findings. Moreover, the control box (rocker switch…
Nice and bright. I was looking for a set of amber lights to install on the rear of the Jeep as a dust light. Well these are warning flashers as well. Decided to give these a go for the cost. I installed and wired them up. Has about 8 or 9 flash patters including solid burn and random through all patterns. They are BRIGHT and work well! If you are looking for a set of warning lights, you will NOT be disappointed with these. The wire from the lights to the switch wasnt long enough to run them to the rear roof of…
Comments are disabled for this post.