4-Way flat trailer end connectors, wishbone style4-way flat 25 ft. Trailer endwishbone harness3 ft. ground. Color coded 18 gauge bonded wires.
Product Features
- 4 way trailer wiring harness, 25 foot length with 3 foot ground wire
- Color coded 18 gauge bonded wires
- Wishbone design for superior trailer installation
- Conforms to SAE J1128 specification
- 4-Way Trailer Wiring Harness, 25 foot length with 3 foot ground wire
- Color coded 18 gauge bonded wires
- Wishbone design for superior trailer installation
- Conforms to SAE J1128 specification
- Limited 1 Year Warranty
Cheap Knock Off I’ve ordered this very item probably 10 times in the last 2 years and always gotten a Wesbar brand wiring harness in retail packaging. This time I got what appears to be a cheap made in Taiwan knockoff. Instead of the wire insulation being the same color all the way through, the plastic on all the wires is brown (lighter in color than the genuine Wesbar) and the green and yellow is paint over the brown plastic.First picture shows original Wesbar on the left, the knockoff on the…
Good quality! The wire on this harness is not the cheap wire that is 95% insulation with two strands of copper inside that you somehow have to crimp a connector onto, heat shrink, and tape to make sure it doesn’t come out of the connector THANKFULLY!Very happy with the purchase and thankful that it is a quality harness.The key when running a new harness is to keep it all tight under the trailer and eliminate it from snagging on anything you drive over, to do this I use staples and…
the older better ones are 16ga
Comments are disabled for this post.