Q1 series LED headlight bulb is the latest upgraded version based on the model C6/S2. Simulation of halogen light principle design, and the maximum degree of matching the reflective cup, Using Seoul extremely bright CSP-Chipsets, so that the light emitted more condensed, the brightness is higher, and even without lens, tangent is also very obvious, 300% brighter than original halogen bulb.
Q1 series including H1, H4, H7, H8 / H9 / H11,H13,9005,9006,9007 and other interfaces. Covering the vast majority of models on the market,including TOYOTA, HONDA, NISSAN, HYUNDAI, etc. as long as the choice of the corresponding model, you can do lossless installation, plug and play, It do not need to destroy the original car.
Q1 Product parameters:
Actual wattage:80W
Lumen value: 9600LM
Light source: CSP Chip
Input voltage: 12-24V
Cooling:12000R/Min
Deck: light type adjustable
Color temperature: 6000K white light
Product life: 50,000 hours
Waterproof rating: IP67
Warranty period: 2 Year
Light source parameters:
(1) Brand: CSP
(2) Power: 40W
(3) Model: TX-1860
(4) Thermal resistance: ≤5 ℃ / W
(5) Color rendering index: 80
(6) luminous efficiency: 120 (LM / W)
Product Features
- More powerful: Extremely bright Seoul LED Chipsets , 300% brighter than halogen bulb ( 40W / 4800 Lumens per bulb )
- Easier to install: Smaller size, plug and play. Generally it takes 20 mins. What proof: IP 67, and dustproof.
- Long working time: More than 50,000 Hours. 2 Year Free Warranty, lifetime customer support.
- Better cooling: Enhanced cooling with RedLine driver, solid aluminum build, and 12000R/Min TurboCool fan results in an LED bulb lasts longer than your car
- Perfect beam pattern: Close to orginal design, the same lighting angle as original halogen lamp, ensure a safe driving.
Good light and bright too, but one came defective This light can be described as is in the description with a few adjustments, here it is;1. If you want a bright headlight, this is it for low/high beams. (H11 works with 2014 Dodge Grand caravan & 2014 Toyota Camry as well and I think there are some more.)2. Ensure when you are removing the old lights, to look at the way they come out, as there’s three slots for the light to be installed properly. Failure to do so will result in the beams being completely wrong (I found it out…
Perfect fit!
Comments are disabled for this post.