LED Lighting Distributors

Product Parameters
Product Name: LED sensor light
Model NO.: GL-NL-SL002
Material: aluminum +PC
Gross weight: 325g
Input voltage: DC5V
Power:3W
Battery capacity: 2400mAH
Charging time: 4 hours
LED quantity: 57 pieces
Color temperature: 6500K
Lumen: 155¡À10Lm
Sensing range: 3 meters
Service life of lithium battery: 500 times charge-discharge
Packing size: 40x30x4.5cm
Angle of illuminationL120 degree

Note and Precautions
1.The human body sensing range is 2 ~ 3m right ahead,and horizontal 120 degrees.
The sensing effect is related to the environment temperature, body figure and
movement speed.
2.The equipped charging cable can only be used for this product, and do not
use for other purposes.
3.The human body sensor can not be covered.When cleaning the surface, it needs
the soft cotton cloth and can not be washed with containing corrosive solvents;
4.Avoid installing in humid places, high temperature place or vents, so as not
to affect the normal use.
5.After being used normally for a period of time, if the light brightness decreases
or working state is abnormal, please promptly charge the light. After being fully
charged, it can continue normal work.
6.Children under 16 years of age must use the product under the supervision of an adult.

Package Included
1 X LED sensor light
1 X USB charging cable
1 X Magnet strip with adhesive
1 X Instruction

Product Features

• ★ 【Soft Light and Eye-care】: The Upgraded Motion Sensor Lamp uses the advanced anti-glare panel, provide bright, gentle and flicker-free lighting, never stumble in the dark, never hurt your eyes or bother others. Also very easy to find what you’re looking for.
• ★ 【Energy Saving】 : Built-in 2400mAh rechargeable lithium battery lasts for more than 150 minutes (Always On Mode) and 1-2 months (Sensor Mode – activated 10 times a day). Needn’t replace the AAA batteries. Save energy and save more money!
• ★ 【Upgrade Intelligent Detection】: Cabinet Light has 2 sensor modes(Motion&Light n the huSensor/Only Motion Sensor). In Motion sensor mode, when the human body is in the sensing range (2~3m in front of the sensor), the light detects the change of the mobile infrared spectrum emitted by the human body, will auto turn on. when the human body is out of the sensing range, it auto-off after about 18s.But when in Motion&Light Sensor mode, the light will turn on only when motion is detected in darkness
• ★ 【Easy to Install】: The sensor night light with the adhesive magnetic strip and built-in magnetic back. Simple to install/remove on any ironwork or non-ironwork surfaces. Allows you to change/switch the location easily.You can put the lights in the cabinet, wardrobe or closet, also can install in a hallway/staircase. Set up motion mode, and the light will turn on when people approaching, avoiding injuries in the dark. In addition, we can also put the lights in anywhere for cooking or reading.
• ★ 【Attention and Service】 : Except the two sensor modes, there is a always on mode, which is not subject to human body infrared sensing control.Providing the best quality products and the best customer service are NO.1 principles. If you have any questions about our products, you can ask questions or messages. We will reply within 24 hours. We will try our best to provide with a satisfactory shopping experience for you.