Specification:
Plug Type: H7/PX26D,Single Beam
Power: 50W/set(25W/bulb)
LED Quantity(each bulb): 6pcs*PHILIPS CSP LED chips
Luminous Flux: approx. 8000lm/set(4000lm/bulb)
Operating Voltage: DC 9-32V(fit 12V/24V vehicle)
Color Temperature: Cool White 6000K
IP65 water and dust seal,360 degree beam angle
Operating Temperature: -40-80 degree Celsius
Material: aviation 6063 aluminum profile
Above 30,000 hours life time
Introduction:
(2pcs/set)H7 PHILIPS CSP LED headlight conversion kit
Imported CSP chips—high Optical density & low heat resistance,enhance light efficiency up to 95%
Fan-less design without ballast,no noise caused by fan
Spread soft white light on road evenly without dark spot/foggy light,will not dazzle on-coming traffic
6500K white light show all weather road situation clearly without glare
Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature
Constant current instant start up,no circuit interference and electromagnetic radiation
Package Include:
2x H7 PHILIPS CSP LED light bulbs
1x English user manual
Product Features
- Plug Type: H7/PX26D,Single Beam; Power: 50W/set(25W/bulb); LED Quantity(each bulb): 6pcs*PHILIPS CSP LED chips; Luminous Flux: approx. 8000lm/set(4000lm/bulb); Operating Voltage: DC 9-32V(fit 12V/24V vehicle).
- Color Temperature: Cool White 6000K; IP65 water and dust seal,360 degree beam angle; Operating Temperature: -40-80 degree Celsius; Material: aviation 6063 aluminum profile; Above 30,000 hours life time.
- Imported CSP chips—high Optical density & low heat resistance,enhance light efficiency up to 95%. Fan-less design without ballast,no noise caused by fan. 6500K white light show all weather road situation clearly without glare.
- Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. Constant current instant start up,no circuit interference and electromagnetic radiation.
- Attention: please check the size of your headlight on your vehicle, and make sure the headlight housing has enough space for installation before your purchase H7 Led Headlight Bulb.
Nice bright bulbs and easy install These bulbs work great in my 2008 Toyota Tacoma. After installing them I properly aimed them so they wouldn’t blind oncoming drivers. They work well in my stock Tacoma Headlights and have a decently clean cutoff. We’ll have to see how well they hold up over time.Edit: Tacoma Owners! Don’t forget to put them in correctly. If yours are spotty, it’s because the bulb upside down. The Auxbeam logo on both sides should face the drivers side.Update: 6 months in and these bulbs…
Just what I was looking for This is exactly the LED bulb I was looking for to replace the halogens on my 2011 Kia Sorento. The Sorento has dust caps and I didn’t want to have to modify them to accommodate a ballast. This bulb also doesn’t have a big fan attached to it and the cooling fins are pretty low profile.I installed the first LED bulb in under 2 minutes. I unscrewed the dust cap first. Then the bulbs snapped right into the sockets and the power cord also connected to the wiring harness no…
Best LED headlights for F150
Comments are disabled for this post.