Please turn on the battery switch to position “I” for charging.
The LED indicator of the AC/DC charger will change from Red to Green if the battery is fully charged.
12V rechargeable Lithium-ion Battery Pack is designed specifically to integrate with our Light bars, Flexible LED Lights, or most 12V DC electronic device.
Technical details:
Built-in 12pcs rechargeable 18650 lithium ion battery cells in 3s4p.
Capacity: 3.7V 38400mAh / 142.08Wh (12pcs 18650 cells, the capacity of each cell is 3200mah at 3.7V)
Input: 12.6V/2A
Output: 12V (voltage range is 12.6-9V) /6A Max. 5V/2.4A Max.
Weight: About 730g
Package content:
1x DC 12V Li-ion Battery Pack
1x DC5521 Male to Male Power Cable
1x 12.6V/2A AC/DC Charger
NOTES
Do not use the 12V lithium battery pack in places with high humidity or where it may be exposed to wet.
Do not modify or disassemble the power bank.
Do not throw the 12V power bank into fire or water.
Do not place the power bank during charging on flammbable materials such as in the bed or carpets.
No long-term placement in a low voltage state. In order to extend the service life, it’s suggested charge every three months if long term storage.
Product Features
- High capacity, Last longer: 3.7V/ 38400mAh.【PB120B1 12/5V lithium ion battery pack is constructed from 12pcs High Quality 18650 cells in 3s4p. The capacity of each cell is 3200mah at 3.7V】【Output: 12V (voltage range is 12.6-9V) /6A Max. 5V/2.4A Max.】【Input: 12.6V/2A】
- Compatible with LED strip light products, CCTV Camera, LED Panel, Modem, Speak, Car DVR or Telescopes, Smartphones, etc.
- It can also power to the Philips Respironics new machines of 60 series and DreamStation series, but you need to purchase the DC5521 Male to DC7406 Male Power Supply Cable separately (B07M5LMJ6X). It can be also used for Philips Respironics old machines of 50 series and M series.
- Supports Over-charged/discharged, Over-voltage, Over-current and Short circuit protection. Multi-led indicator, 4 LED indicators displaying battery percentage. The size of PB120B1 and PB120B2 DC Output and Input ports are all 5.5 mm x 2.1 mm.
- 12.6V/2A charger and cable are included. The battery is designed for a slow charge process (about 10 hours for full charge), which helps the battery life last longer.
Nice battery but exactly as specified. This battery is light weight and works well so far we. However, some things you might want to know before buying this battery.While the listing does give a ton of details, let me break it down into layman’s terms.This battery total is as advertised but the configuration yields 1/3 advertised MAhour.Instead of 38,400 MAh (3200MAh x 12), it is 3200MAh x 4 or 12,800MAh at 12v. I have not fully tested it but 18650’s are good batteries.This leads me to the…
Powers my CPAP for 32+ Hours This battery pack is absolutely amazing! It powers my Philips DreamStation DSX500T11 CPAP machine for 4 full nights (32+ hours) on a single charge. My settings are no humidifier, 99% mask fitment, and 11.0 cmH20 pressure. I put it in my carry-on backpack and TSA did not ask a single question about it. I’m sure you could extend the battery life with a solar powered charging system if you need more than 4 nights. I would definitely recommend this battery pack for any CPAP user that spends…
Comments are disabled for this post.