TORCHSTAR new arrival angle adjustable LED recessed light designed with 5000K color temperature and 120 degree beam angle
which provides softer ambient light. It is perfect for general indoor lighting in office, study, living room,
kitchen, dining room, display case, under cabinet, etc.
The UL qualification guarantees incredible safe operating performance. It is an ideal replacement kit for your old 75W halogen light.
10 LED ceiling light With 920 lumen brightness and yearly cost of $1.2 while a 75W halogen light is $9
(based on 3hrs/day, 11¢/kWh, cost may vary depending on rates and use).
This product comes with an e26/e27 base adapter and self-retained spring clips, which makes the installation extremely easy;
no other tools or components are needed.
TIPS:
Risk of fire and electrical shock
This directional recessed light can tilt in only one direction
Housing compatible:
HALO
LED CAN:
5inch: H550ICAT, H550RICAT.
6inch: H7ICAT, H7RICT, H7UICT,H27 ICAT,H27ICT, H5RICAT, H750TCP.
CFL CAN:
5inch: H524RICAT, H570ICAT, H571RICAT, H5RICA.
ALL-PRO:
INCANDESCENT CAN:
5inch: E1500AT, E1500RAT, ET500, ET500R
6inch: E1700, E1700NB, E12700, E12700AT, E1500AT, E1500RAT
JUNO:
5inch: TC20R, IC20R, IC25R, PL526R, ICPL526REN.
6inch: IC22, IC22S, IC23, IC21, IC21R, IC25
Specification:
Outer diameter: 7.3inch/185mm
Inner diameter: 3.74inch/950mm
Height: 2.97inch/75.5mm
Voltage: 110-120V/AC
Wattage: 10Watt
Beam angle:120 degree
Waterproof rating: IP20
Lumen: 920lm
Dimmable: yes
Color temperature: 5000K (daylight)
CRI: 90
Life span: 25,000hours
Package included:
1 pc LED recessed light
Product Features
- Adjustable Design: The light head is 360°horizontal and 45°vertical rotatable to achieve flexible area lighting, which can light up wherever you want. Perfect for sloped ceiling or accent lighting
- Perfect Illumination: 90+ ultra high CRI, shows objects’ true and realistic color, and things under the light will be displayed vividly. 5000K daylight provides clear and bright lighting for you
- Smooth Dimming: With 10%-100% smooth dimming, this downlight creates different brightness, which allows you to control the look of your space. Compatible with most of LED dimmers in the market
- Energy Efficient: This 13W LED downlight would perfectly replace a 100W incandescent fixture while only costing $1.57 in your electricity bill per year based on 3 hours/day, saving up to $1340 with the 4-pack set during its lifespan
- Reliable Quality: The UL and ENERGY STAR listed product ensures superior quality, safe operation, and high energy efficiency. Our 5-year warranty guarantees your rights and interests, providing extra protection for you
Easy to install, great light, great value. I bought these to replace standard down lights in my wife’s art studio. She wanted control of the direction of the light. My existing cans (housing) are 6 inches wide. They went in quickly and easily, barely 5 minutes to change 6. There is a screw in adapter to accommodate standard bulb fixtures. The springs are strong and pull the fixture tight to the ceiling. The ring covers the housing properly so they look good. The head swivels almost all the way around, about 350 degrees and can be…
Junko, instantly went back: PICTURES DO NOT MATCH PRODUCT Zero stars. These are very cheap. This review is for the flat version, not eyeball. The light face where a recessed ring is, there are plastic tabs over the LED translucent plastic that look ridiculous. If you have these up really high, like 20 foot ceilings, sure they probably will work fine, but if you’re like most, these are noticeably cheap. I would not recommend these for residential; cheap commercial yup, no problem. The pictures on the website DO NOT SHOW THE CHEAP PLASTIC TABS ON THE…
Overall Good but a Few Things to Note Generally I’d say the product is quite good. They dim down without flickering, the light is of a uniform intensity over the lens and the light output does seem to meet the stated wattage/lumins.I purchased these for a gabled ceiling where the gimbal function is needed to aim the light essentially perpendicular to the floor. The “gimbals” are just stamped sheet metal so they do not adjust smoothly. Nonetheless with a little “fiddling” you can get them adjusted over a relatively…
Comments are disabled for this post.