')){kind=link}
The LAMPHUS® Cruizer™ Horizontal Bar Clamp Mounting Kit simplifies the installation of the Cruizer™ off road LED light bars onto your roof rack, bull bar, or headache rack. The kit can be used for tubes sized at 1”, 1-1/2”, 1-3/4” & 2″ in diameter. Includes an Allen hex key with purchase.
Interchangeable/Compatible with:
All sizes of the LAMPHUS® Cruizer™ Series Light Bars
Features:
- Simplifies installation.
- Can be used on tubes of 1”, 1-1/2”, 1-3/4” & 2″ in diameter.
Product Content:
- 2 x Clamp
- 2 x 1” Rubber Insert (2 pieces)
- 2 x 1-1/2” Rubber Insert (2 pieces)
- 2 x 1-3/4” Rubber Insert (2 pieces)
- 2 x 2” Rubber Insert (2 pieces)
- Doubled Sided Tape
- 2 x Allen Hex Key
Specifications:
- Dimension: 4-1/8” W x 2-7/8” H x 1-1/16” D (10.5cm x 7.3cm x 2.7cm)
1 Year Warranty
Have a Question? Call Us Toll Free 1-855-LED-ONLINE (1-855-533-6654)
Product Features
- User Manual available for download under Product Information Details
- Simplifies Installation
- Can be used on tubes of 1″, 1-1/2″, 1-3/4″ & 2″ in diameter
- Includes an Allen hex key with purchase
Related Posts
Led Light Bar, Nicoko 52 inch 300W Curved RGB Multicolor Chasing Off-road Light Bar Bluetooth App Controlled Combo Beam IP 67 Waterproof for Off-road Vehicle, ATV, SUV, UTV, 4WD, Jeep, Boat 300w 52inch Curved RGB Led light bar […] Posted in Light Bars
AmeriLuck 5000K Daylight PAR38 LED Flood Light Bulb, 90W Equivalent, 900Lumens Non-Dimmable 13W, Ideal Outdoor Security Light Wet Rated, UL Listed (4 Pack) ✔ DIRECT REPLACEMENT & […] Posted in LED Bulbs
Motorcycle LED Headlight Truck Spotlight U5 ATV Fog Light Boat Driving Lighting Offroad Auxiliary Lamp Mini Front Daylight 12v 24v High Low Beam Strobe Modes w/Toggle Switch White
Product Features
FITMENT: Input […] Posted in LED Motorcycle Lights
It doesn’t work as advertised. Also received used and incomplete sets Not very well designed, but worse yet, the seller – Online LED Store – shipped me two used and incomplete.Product Issues:1 – will not retain to 1″ and it’s easy to move, so I installed it to a 1 1/8″ bar using the same rubber pads for the 1″. It holds unloaded, but I can still twist it by hand and also slide it up and down the bar. The bar is a Yakima load bar, 1 1/8 inch and it’s powdercoated with a rough texture, so it’s not slick. This was after torquing the bolts…
These mounts are made of solid metal and have quite a bit of weight to them. My purpose was to mount a license plate bracket to 3/4″ square tube which I reasoned would require approx 1″ diameter mounts. The reviews noting that the mounts don’t fit snug on 1″ round bar had me concerned but I ordered them anyway.After applying the smallest diameter rubber adapters and cranking down the allen screws (nice touch) as far as possible the mounts were snug but NOT snug enough on…
Comments are disabled for this post.