Xenlight LED headlight bulbs solve the most critical product flaws and bring you a headlight replacement for vehicles using HID bulbs or Halogen Bulbs.
Having a the proper beam pattern and No warm-up time for full brightness,LED lighting can shine in over the place, resulting in a strong focused light that is No scattered and foggy from the moment.
*Xenlight focused in:
-A Perfect Light Pattern: InFocus-Beam Lens Technology -Crafted around the powerful CREE LED cell provide the LED headlight with the CORRECT beam patterns. No dark spots, No short beams, No scattered beams
–6000K Cool White daytime lighting.Plus,Instant-On capability with zero warm- up time.
*Heat-sink
Copper Mesh spread freely as possible as housing space to maximize surface area for optiomal cooling.
*Mixed Heat Sink System (MHSS) Technology to ensure a maximum 50,000 hr life.
-Woven mesh based Copper strands can spread freely as possible as housing space to maximize surface area for optimal cooling.
-Advanced electronic protection design syncs with the Driver to optimize for heat protection and consistent brightness output.
-Driver Sperated with bulbs Cut off the heat generated from ASIC
-Regulates LED power using an high-efficient micro algorithm.
-Exchange heat into mesh by aeronautical Liquid nitrogen As fast as can
*Truly Plug-N-Play(PNP)
-Smaller Neater Bulbs can be easily plugged in the mount of original light fixtures
-Kit Including pairs of Bulbs and drivers with wire harness, 1 PCS installation manual.
–No CANBUS is ready,LED lights maybe flicker on some vehicles, this is caused by the vehicle’s onboard computer failing self-check test due to the new LED kit you just installed.This can be corrected by adding a set of warning cancellers(load resistors) to your setup
Product Features
- 5000K Yellow light @ 7,000Lm (3,500Lms per bulb) LED lighting without dark spots! InFocus-Beam LED is the only light that uses high performance CREE LED cell to ensure a perfect beam pattern without any dark spots or foggy light
- Multi-Path heat controll with KeepCool driver ensures bulbs Over 50,000 hrs of brilliant continuous light
- Works underwater! Rainproof driver, housing, works even in extreme situations
- Can be installed in less than 20 mins As easy as changing bulbs. All of Necessary Hardware and Instruction are Included,Truly ALL IN ONE
- Driver can accept a power input from the vehicle power with voltage floating of from 8 to 36v and apply to different types of trucks,cars,and other vehicles etc
Installed easy and look great but only stay on for 5 …
Crappy, crappy, crappy Horrible quality, color and dead spots in projector lenses. Easily the crappiest build quality I’ve seen – wouldn’t trust them to stay together and connected; ballast is in no way water tight.ONLY redeeming quality is the mounting ring can be rotated in 90deg increments, but it had to secured to the bulb with screws, making it extremely difficult to engage the locking spring of the housing. The included instructions are worthless and written in the worse English I’ve seen in a long…
Garbage, do not buy
Comments are disabled for this post.