Specification:

Voltage & Wattage:12V
Color: white & red
Package Included:
1x Bag of Mounting Hardware
1x License Plate Bracket
2x Wiring Harness
2x 12V submersible led trailer lights

How to connect wiring?

Connect the brown wire on the wire harness to the brown wire on the lights(Tail/Running Lights)
Connect the yellow wire on the wire harness to the yellow wire on the lights(Left StopTurn light)
Connect the green wire on the wire harness to the green wire on the lights(Right StopTurn light)
Attach the WHITE GROUND wire to the towing Trailer s frame

Completely sealed for a long corrosion-resistant
1.The trailer light screw nut is made of 304 stainless steel which greatly improves the anti-rust performance.
2.The lens and housing of the trailer light are ultrasonically welded to to block water out and allow the trailer go to the water for a short time,ensure the circuits are protected.

Premium Quality Material:

– Each Trailer light has passed 3-4 atmospheric pressure waterproof vacuum test.
– Each batch of trailer lights passed the test of 2 Hz-600 Hz destructive vibration machine.

Cost effective and flexible light alternative:

– Outfitted for trailers measuring up to 80 inches wide.
– LED lights last 30-40 times longer than standard incandescent bulbs.
– Replace your bulbs less often and maneuver your trailer with confidence.
Tips
The circuit board of tail light is water proof. This is to guarantee that water will not damage the diodes or circuit board. A drain hole is designed to pull out all the water. Please install the trailer taillights with the drain hole downwards.

Product Features

  • 【High Visibility LED】- High Brightness LED Combination tail lights last longer than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. 625 lumens of light providing Super bright illumination,no glare, NOT incandescent Bulb!
  • 【Completely Sealed and IP68 Waterproof】- Submersible Led Trailer Lights’s lens and housing use Ultrasonic Welding Technology to achieve IP68 Waterproof, the inside of housing and LEDs , harness and PCB with enough waterproof glue to prevent water into.A drain hole is designed to pull out all the water.Please install the trailer taillights with the drain hole downwards.
  • 【High Power Clean Flux Led Lights】- Right Tail Light have 39LEDS SMD 5050 lamp beads : 16 Red diodes for halo light+20 Red diodes for front light+3 Red diodes for side light+9 White diodes for license Plate illumination . Left Tail Light have 48 LEDS : 16 Red diodes for halo light+20 Red diodes for front light+3 Red diodes for side light+9 White diodes for license Plate illumination
  • 【Detailed Installation Instructions】 – With 22ft length wire harness that it is long enough to reach end of trailer, connect the BROWN wire to the towing vehicle’s Tail light wire. Connect the YELLOW wire to the towing vehicle’s Left Stop & Turn light . Connect the GREEN wire to the towing vehicle’s Right Stop & Turn light . Attach the WHITE GROUND wire to the towing vehicle’s frame.
  • 【Widely Application + DOT Certification】- The 12V LED trailer lights are designed for Applications under 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc. Our Lights are 100% compliant with DOT certified, this ensures that your lights are federally compliant.

Share Button