')){kind=link}
Application:Headlamp Dual Beam/Headlight High Low Beam
Interchange Part Number:H4,9003,HB2
The Broview S7(No Fan Version) is 7thG Car LED Headlight with Unimaginable Quality.
Class LED Light Source:
– Broview S7 use special Lumileds LUXEON ZES CHIP LED light source for automobile, the super brighness led chip on behalf of the world’s most advanced technology
– Light distribution match with original car headlight and halogen bulb
– Clear boundary improved safety without stray light, there is no glaring light for opposite driver
– Broview S7 is a highly bright headlight,the experiment shows it exceed original car LED headlight
Class structural design:
– Without fan structure design, exceed the original car headlight heat dissipation design
– Headlight base reversible, Diversified installation with adjustable beam angle.
– Two Kinds of Base Installation(refer to manual)
– Adjustable chuck angle, Applicable for more vehicles
High standards of design:
– Derived from European union E4 standard design
– Improved the brightness effectively which also improved the driving safety
Updated driver:
– Lighting solution,applying electrolytic capacitor special for automobile
– Reliable vehicle power supply solution,military standard copper wire structure
– Standard power management solution for automobile,special power control for IC
– LDO solution,suitable for severe car environment
– Stable circuit ensure stable brightness
Package:
*2 x LED Lights
*2 x Drivers
*1 x Manual
Product Features
- BROVIEW S Series Model S7(No Fan), 2016 Latest Version Headlight Conversion Kit LED Bulb, w/Brightest 16-Lumileds-ZES Chip, Base Reversible, Improved MHP TECHNOLOGY, 50,000 hr life-time.
- Interchange Part Number: H4,9003,HB2. Application:Headlamp Dual Beam/Headlight High Low Beam
- 6000K-6500K White, 25W/PC(50W Total), 4000LM/Bulb(8000Lumen Total). Waterproof level: IP68
- Base Installation: Base Reversible, Shorter light body, Suit more vehicles. Plug-N-Play, Fast ON/OFF, NO “warm up”; No Ballast, safe for driving, NO UV Radiation, NO disturbing Interference, With Upscale Laser Logo
- Aftermarket LED Headlights Replacement HID/Xenon/Halogen Head Lights. The Brightest & Most Energy Saving & Longest Using Time
Related Posts
Streamlight 74301 Strion LED Flashlight with AC/12-Volt DC and 1-Holder, Black
Anti-roll head prevents the light […] Posted in LED DC Bulbs
Sunco Lighting 10 Pack Industrial LED Shop Light, 4 FT, Linkable Integrated Fixture, 40W=260W, 5000K Daylight, 4000 LM, Surface + Suspension Mount, Pull Chain, Utility Light, Garage- Energy Star Linkable Industrial Shop Light […] Posted in LED Lighting
Nebo 6306 Big Magnum Larry Flashlight Worklight COB LED Super Bright Magnetic Assorted Colors The big knows how to light up a room! […] Posted in LED Flashlights
Bright and bluish light I received this item to test and review. This is my opinion:This LED headlight set is bright and easy to install. In the photos, I show the color difference between this bulb (left) and a standard halogen bulb (right). There are no written instructions, just a series of drawings to show how to install the bulbs. But I will tell you how I installed them on my 2009 Highlander. You’ll see in photos where I am holding up this LED bulb next to the original halogen. You have to…
Good light output, but one bulb defective I received this product at a discounted price in exchange for my honest review.Pros:1. Fast shipping2. Good packaging3. Light output is bright4. Adjustable base5. Adjustable angle (this is also a con, see below)Cons:1. The screw for the adjustable angle was either stripped or cross threaded on one bulb, so only one of my bulbs was adjustable.2. Customer service was responsive, however, not exactly helpful.I purchased…
Installed these in my 2010 Highlander Limited.. Love Them! Purchased these bulbs for my 2010 Highlander Limited (H4/9003) Overall I’m very happy with these headlights. I Originally purchased a set of opt7 bulbs, and although they may have been a little bit brighter, they scattered light everywhere! These BroView bulbs have a shield that keep the low beam LED’s pointing only in one direction (which for my application was essential as my headlight housing uses the top half of the reflector for low beams, and both top and bottom for high beams) I only…
Comments are disabled for this post.