')){kind=link}
The LAMPHUS® Cruizer™ Horizontal Bar Clamp Mounting Kit simplifies the installation of the Cruizer™ off road LED light bars onto your roof rack, bull bar, or headache rack. The kit can be used for tubes sized at 1”, 1-1/2”, 1-3/4” & 2″ in diameter. Includes an Allen hex key with purchase.
Interchangeable/Compatible with:
All sizes of the LAMPHUS® Cruizer™ Series Light Bars
Features:
- Simplifies installation.
- Can be used on tubes of 1”, 1-1/2”, 1-3/4” & 2″ in diameter.
Product Content:
- 2 x Clamp
- 2 x 1” Rubber Insert (2 pieces)
- 2 x 1-1/2” Rubber Insert (2 pieces)
- 2 x 1-3/4” Rubber Insert (2 pieces)
- 2 x 2” Rubber Insert (2 pieces)
- Doubled Sided Tape
- 2 x Allen Hex Key
Specifications:
- Dimension: 4-1/8” W x 2-7/8” H x 1-1/16” D (10.5cm x 7.3cm x 2.7cm)
1 Year Warranty
Have a Question? Call Us Toll Free 1-855-LED-ONLINE (1-855-533-6654)
Product Features
- User Manual available for download under Product Information Details
- Simplifies Installation
- Can be used on tubes of 1″, 1-1/2″, 1-3/4″ & 2″ in diameter
- Includes an Allen hex key with purchase
Related Posts
WenTop® Led Strip Lights Kit Non-waterproof SMD 5050 32.8 Ft (10M) 300leds RGB 30leds/m with 44key Ir Controller and Power Supply for Trucks Boats Kicthen Bedroom and Sitting Room Features Continuous length, packed […] Posted in Rope and String Lights
2018 Flame Bulb, LED Flame Effect Light Bulb, E26 Standard Base, Atmosphere Decoration Fire Flickering Simulation 105 pcs 2835 LED Beads -Flame Bulb for Home Decoration (4 Pack) ♥LED Flame Effect Fire Light […] Posted in LED Bulbs
AmmToo Pack of 6 MR11 LED Bulb 3Watt Spot light 12V AC/DC Cool White GU4 Base 2835SMD 18LEDs 6000K 260lm LED Spot light Bulbs 30W Halogen Bulbs Equivalent Size:6 […] Posted in LED DC Bulbs
It doesn’t work as advertised. Also received used and incomplete sets Not very well designed, but worse yet, the seller – Online LED Store – shipped me two used and incomplete.Product Issues:1 – will not retain to 1″ and it’s easy to move, so I installed it to a 1 1/8″ bar using the same rubber pads for the 1″. It holds unloaded, but I can still twist it by hand and also slide it up and down the bar. The bar is a Yakima load bar, 1 1/8 inch and it’s powdercoated with a rough texture, so it’s not slick. This was after torquing the bolts…
These mounts are made of solid metal and have quite a bit of weight to them. My purpose was to mount a license plate bracket to 3/4″ square tube which I reasoned would require approx 1″ diameter mounts. The reviews noting that the mounts don’t fit snug on 1″ round bar had me concerned but I ordered them anyway.After applying the smallest diameter rubber adapters and cranking down the allen screws (nice touch) as far as possible the mounts were snug but NOT snug enough on…
Comments are disabled for this post.