This is a simple plug-and-play white brighter viewing angle wider intelligent cooling dustproof waterproof LED Headlight bulb.
TIREUIS is auto lighting technology research and development experts, with 15 years experience in auto parts research and development, to experience the latest achievements of science and technology research and development, select TIREUIS products and services, is the best choice..

Details:
Chip:Philips Lumileds ZES
Power:60W(30W/1)
Luminous:9600lm(4800lm/1)
Number of LED(each bulb):6PCS
Material: Aviation 6063 Aluminum + Copper
Operating Voltage: DC 9~32V (fit for 12V, 24V vehicles)
Operating Temperature：-40~105℃
Grade of Waterproof and Dustproof：IP68
Service Time: 50000,you will never need to replace a light Bulb Again
Package Included:
– Two(2) LED Single Beam Headlight Bulbs
Warranty: 3 years
Certification: CE, RoHS.

Before buying, you need to confirm the corresponding model of your headlights. After you replace you Halogen lamp with led light,the increased brightness,energy-consuming reduction ,the smaller current cause these problem,you meet you can solve it by CANBUS:flashing, LED light turning off when engine starts, No light,Interference of audio and video ,Fault light alarm,Indicator light does not shine. Led headlight not compatible with some cars.Since not every customer’s car will meet this problem，CANBUS or Holder or Dust Cover is not included in the package of the product.But if you need it please contact us ,we will Free of charge Separately send a CANBUS for you freely to deal with the issue mentioned above. When we design products, 9005 and 9006 are compatible. The default is 9005 rubber ring. If used as 9006, you will need to replace the rubber ring in our product box. If the LED headlight is not fixed in your car, or the dust cover is not buttoned up, you may need to replace them,Holder or Dust Cover you need to buy it.

Product Features

  • 1.LED Headlight bulb can be installed quickly, is very simple, plug and play, no need to modify the original car lines, non-destructive installation, positive and negative poles are not separated, the entire process takes about 15 to 20 minutes, no different from the installation of OEM halogen headlight bulb , Remove the old light bulb, insert a new LED light bulb, connect the front light wire harness to the LED front light harness;
  • 2.Difference is that the OEM halogen lamps are white light. The light emitted from them is brighter and the viewing angle is wider. The beam is very clean and consistent. The opposite drive will not flash to you. The top Philips Lumileds ZES chip is resistant to 200°C. Highlights 9600lm (4800lm / Pcs), 6000K white light, 3 times brighter than halogen light, 200M effective distance, service life of over 50,000 hours, no black spots, no short beam, no scattered light.
  • 3.It produces moderate heat, which is not unusual. The intelligent variable frequency fan technology, low temperature, high speed and high temperature, stop the fan, the light is still working. It will not let your lamp have any moisture or water droplets;
  • 4.IP68, completely protected against foreign matter and dust, works properly under water; yes, you buy more than this bulb product itself. It also includes our three-year warranty service. When you need it, we will serve you for the first time;
  • 5.It can be matched with 99.9% of models on the market correctly. If your car has problems after installation, don’t worry, you just need to install a CANBUS to solve the problem; because of the size of the cooling fan on the back, you may need to make There is plenty of space for the fan; only about 0.1% of the models need to replace the holder base, and may need to trim or replace the rubber dust cover to fit the back of the lamp, if you need it, you will have to buy extra.

Share Button

Related Posts

Sovrn