 32W Fluorescent Bulbs')){kind=link}
This is an Orilis elegant oil rubbed bronze surface mount fixture with a set of (2) LED T8 24 Watt Bulbs included (48W Total). This wraparound fixture has an inner metal cover to hide wires. These LEDs are 30% brighter than the standard 18 Watt LED bulbs. The fixture uses a frosted, prismatic acrylic lens with oil rubbed bronze end plates to provide widespread illumination. These bulbs work as an Eco-friendly and cost efficient replacement for (4) 32 – 48 Watt (128w- -192w Total) Fluorescent T8 bulbs. This fixture requires no modifications at all. All of the necessary conversions have been completed. Mounting hardware is included.
Product Features
- Elegant SURFACE MOUNT LED WRAPAROUND FIXTURE
- 6500 KELVIN / 6000 LUMENS
- DIMENSIONS: 49.875 x 7.5 x 2.75 IN
- HARDWIRED
- NO BALLAST TO REPLACE / MOUNTING HARDWARE INCLUDED
Related Posts
Lithonia Lighting SGLL 24 80CRI 40K PIR M4 Indoor LED Garage Light with Integrated Motion Sensor 80CRI2-Footblack The 2-foot LED garage light by […] Posted in LED Lighting
LE 4 Pack 8W 3.5-Inch LED Recessed Lighting, 75W Halogen Bulbs Equivalent, Not Dimmable, LED Driver Included, 400lm, Warm White, 3000K, 90° Beam Angle, Recessed Ceiling Lights, LED Downlight Pack of 4 units NON-DIMMABLE 8W […] Posted in LED Lighting
GetInLight 3 Color Levels Dimmable LED Under Cabinet Lighting with ETL Listed, Warm White (2700K), Soft White (3000K), Bright White (4000K), White Finished, 48-inch, IN-0210-6 GetInLight IN-0210 Series Under […] Posted in LED Lighting
Like other have said the retrofitted bulb holders on the … 1/12/16 2 of 4 lights received with damaged light covers. I kind of expected this from other reviews. Like other have said the retrofitted bulb holders on the ends had come loose on some. They only slide into the stamped slots in the end of the fixture. Some of the hardware that was taped to the bulbs was loose and rattling around in the box. This was a little concerning because it sounded like glass, so I thought the bulbs were broken at first. I was relived upon opening to see screws and wire…
It twists and flexes like crazy. The end caps have to be bent … Wanted a surface mount LED for the kitchen to replace the old 4-bulb w/ballast. For $125 you would expect something at least decent and since the reviews were OK I took the plunge.1. Everything was in the box in new condition.2. There is no hole or knock out plug to pass wires from he junction box through to the front side of the fixture. Probably ok if you have a reasonably deep junction box recessed into the ceiling. Mine was very shallow (<1/2" depth. Had to drill...
I love our new light
Comments are disabled for this post.