LED Lighting Distributors

Flexible Light Strip Specifications:

Color of bulbs: red,yellow,gree,blue,pink ,purple ,white and multi color can be available
Number of strips: 12
Number of remote: 1

X4 strips with 6 LED lights in each
X4 strips with 12 LED lights in each
X4 strips with 18 LED lights in each
For use with 12V vehicles only
4key remote controller

Flexible Light Strip Benefits:

Super bright LED’s
Flexible and durable strips
Transparent when not in use
Simple to install
Waterproof
For use with bikes, scooters and mopeds

Remote Control System Specifications:

Range: 5-10m
Power: 12V DC
Channels: 2
Signal coding: 4 bits
Static current: = 6mA
Sensitivity: > = -105dB
Frequency: 315MHz
Working mode: latch
Encode/decode: joining
Chip dimensions: 6 x 4cm (2.2 x 1.6)
Remote control dimensions: 5 x 2 x 1cm (2 x 1.5 x 0.5)
Weight: 32g

Remote Control System Benefits:

Huge5-10m range
Easy to install and use

Remote control function
4 Button Wireless Remote
A – Color/Cycle Select – the first 15 pushes are for the 15 different colors, push 16 activates the 7 color Loop function, push 17 activates the 7 color Fade function, pushing again starts the cycle over.
B – Flash – Strobe effect produced by a 3 preset/programmed set number of flashes and a set time pause.
C – Fade – Smooth in and out from bright to dim LED power effect produced by a preset/programmed setting.
D – On/Off – Turn lights on and off.

You could buy more LED Kits from our Amazon store, please search SCREAMFOX keyword in Amazon. Thanks.

Product Features

• Light up your entire bike! Unique 15 color 12Pcs LED strips with 144 LED’s gives you all the light you need to make your bike truly shine!
• Fitment Information: This is a universal product and therefore has unlimited uses and mounting possibilities. This includes, but is not limited to: Sportbikes, Cruisers, Scooters, ATV, Quad, UTV, MX, Dirt Bike, Enduro, Dual Sport, Golf Carts, Trailers, and even Snowmobiles.
• Strips: 12x Waterproof, Black Backing, Clear Silicon Cover, High Impact Plastic Plugs, 144 Surfaced Mounted RGB LEDs,Four Pcs 10cm , Four Pcs 20cm, and Four Pcs 30cm Flexible Strips
• Wiring: 12 Volt DC Systems, Red Wire (Positive) with In-line Fuse (F2AL250V, 2A), Black Wire (Negative) Wire Length approx 12″ (30.5cm) from Receiver Unit
• Install: Each strip is backed with super 3M stick tape for easy mounting. Can easily be bent or curved to desired position. Pre-installed Adhesive Tape on Strips for easy installation.