Built-in magnet
Refrigerator iron, The magnet sticks to where you are wanting the light to be, and then the light itself has a magnet built into it.
Please stick to the non-rion position together with the sheet iron & 3M tape.You apply double-sided tape to whatever you want the light.
The light adheres to the magnet.
Just pop the light of the magnet and use a cell phone/USB cord to charge it.
Then put the light back on the magnet when fully charged.
Color: Silver
Specifications
Color temperature: 6000-6500K(Cool white)
LED life: >50000H
LED Quantity: 20 SMD 2835
Luminous flux: 180lm (+/- 20%)
Battery powered: 3.7V (built-in 1000 mAh Polymer lithium battery)
Influence Distance: 3m/10ft (+/- 20%)
Influence Angle: 100(+/-20%)
Charging parameter: 5V, 500mA (or 1000mA)
Size: 7.5*0.5*1.33in
Package:
1x LED light
1x Operation instruction
1x Micro USB cable
1x Sheet iron
4x 3M Tape
Tips:
1.Not waterproof, do not use this product in damp places.
2.Please charge at least once a month to extend battery’s life if not in use for a long time.
90-Day Money Back Guarantee
If for any reason you are not completely satisfied with your purchase, please contact us. Our RXWL team to you will make things right!
Product Features
- Working Mode: One end has a three-way switch which is ON-OFF-G set it to always on or motion-sensor, or off It uses simple 3M sticky tapes to tape the light anywhere you want it to be and then the light itself has a magnet built into it.
- Super Bright & Rechargeable: Built-in 1000mAh rechargeable polymer lithium high-capacity battery, via the included USB cable, use a cell phone/USB cord PC, laptop, power bank to charge it.
- Motion Sensor: Automatically senses human motion within 10ft/120°and shuts off after about 20 seconds of no movement.
- Built-in Magnet to Stick on Any ironwork: Very easy to install and get setup no need drilling or extra switch. pretty compact and stylish, so you can remove the light from the magnet for charging or as a hand-held light ( you can use the included double-sided 3M tape and iron sheet to stick on any non-iron article surface)
- Various applications: It can be placed in a closet gun safe drawer cabinet garage stairwell hallway staircase basements apartment wardrobe hallways garage entrances or any other dark place.
Perfect! These turned out to be a lot smaller than anticipated, but I’m happy with their size. They are easy to mount, easy to remove and replace, “invisible” when mounted beneath my overhead kitchen cabinets (which is why I bought them), and put out an impressive amount of light for their size. Although a couple of others’ reviews commented that the motion sensors didn’t work for them, I can happily report that is not an issue with mine. The motion sensor works perfectly. They are sensitive…
Great under cabinet LED lights but….read this. So I bought these for under kitchen cabinet lighting in my new house. I didn’t want to run wires and I thought these would be a great alternative. And it was. But, if you plan on using these for under cabinet lighting, be aware of 2 things;1: The cabinet bottom lip interferes with motion detection. There usually is a lip under your cabinet. You have to put them under the cabinet but the lip is in front of the light. This lip blocks the motion sensor, thus cutting the motion…
Works Better Than Any I’ve Purchased Before These little lights are AWESOME. I mounted one over my front door April 10 when it was still snowing in Chicago and it worked flawlessly in the cold. It only comes on at night and only when it senses motion. Although the switch can be put in the “ON” or “OFF” position, as well. I could never get my key in the door in the dark, and it throws a lot of light out for me when I’m at the door. I’ve got sidelights on either side of the door and even though I walk past these…
Comments are disabled for this post.