9004 ONLY have a same beam pattern for high and low, And switch(Hi/Lo) is used as dimmer.At this time, when High beam is working bulbs have FULL power And when low beam is working bulb have 80% of full
Having a the proper beam pattern and No warm-up time for full brightness,LED lighting can shine in over the place, resulting in a strong focused light that is No scattered and foggy from the moment.
*Xenlight focused in:
-A Perfect Light Pattern: InFocus-Beam Lens Technology -Crafted around the powerful CREE LED cell provide the LED headlight with the CORRECT beam patterns. No dark spots, No short beams, No scattered beams
–6000K Cool White daytime lighting.Plus,Instant-On capability with zero warm- up time.
*Heat-sink
Copper Mesh spread freely as possible as housing space to maximize surface area for optiomal cooling.
*Mixed Heat Sink System (MHSS) Technology to ensure a maximum 50,000 hr life.
-Woven mesh based Copper strands can spread freely as possible as housing space to maximize surface area for optimal cooling.
-Advanced electronic protection design syncs with the Driver to optimize for heat protection and consistent brightness output.
-Driver Sperated with bulbs Cut off the heat generated from ASIC
-Regulates LED power using an high-efficient micro algorithm.
-Exchange heat into mesh by aeronautical Liquid nitrogen As fast as can
*Truly Plug-N-Play(PNP)
-Smaller Neater Bulbs can be easily plugged in the mount of original light fixtures
-Kit Including pairs of Bulbs and drivers with wire harness, 1 PCS installation manual.
–No CANBUS is ready,LED lights maybe flicker on some vehicles, this is caused by the vehicle’s onboard computer failing self-check test due to the new LED kit you just installed.This can be corrected by adding a set of warning cancellers(load resistors) to your setup
Product Features
- 6000K Cool white light @ 7,000Lm (3,500Lms per bulb) LED lighting without dark spots! InFocus-Beam LED is the only light that uses high performance CREE LED cell to ensure a perfect beam pattern without any dark spots or foggy light
- Multi-Path heat controll with KeepCool driver ensures bulbs Over 50,000 hrs of brilliant continuous light
- Works underwater! Rainproof driver, housing, works even in extreme situations
- Can be installed in less than 20 mins As easy as changing bulbs. All of Necessary Hardware and Instruction are Included,Truly ALL IN ONE
- Driver can accept a power input from the vehicle power with voltage floating of from 8 to 36v and apply to different types of trucks,cars,and other vehicles etc
They are great other than the radio issue (hopefully solved) I purchased these LED headlights for my 2008 Scion XB. Installation was really easy, just twist out the old halogen bulb, insert the LED bulb, plug the driver in to the bulb and the other end in to the cars original wiring harness for the headlights. I only replaced one to begin with and waited until it got dark so I could see if the LED bulb made much of a difference, which it did, so I grabbed a flashlight and quickly swapped out the second bulb. The light coming from my headlights is a…
Causes severe radio interference, and condensation in housing. Puts out decent light but you get what you pay for. Installed in my 2015 focus fog lights and when turned on, causes severe radio interference. I can not pick up radio stations that are easily picked up when they are turned off. I have used many different brands and flavors of lights but have never had this issue beforeAlso there is condensation in 1 of fog lights a week after install.They produce decent light but can not ever turn them on if listening to the radio which is unfortunate.I have another brand…
Comments are disabled for this post.