DITRIO 6pcs LED Light Strip Kit in RGB MultiColor with 5050 SMD Chips including 6pcs 1-2 Way Y Splitters for Motorcycles ATVs UTVs and Harley Davidson

LEDdistributors • 4 years ago

Here are some useful tips that are good know:

1. AVOID THE ENGINE

– Don’t stick a LED strip directly on the surface of your engine; the heat will melt it.

2. PICK A UNIFIED, CLEAN AND DRY SURFACE

– To obtain optimum adhesion, pick a unified surface and prepare it clean and dry.

– Consider to use surface cleaning solvents IPA/ water mixture (rubbing alcohol) or heptane.

3. APPLY PRESSURE AT LEAST 3 SECONDS

– Firm application pressure develops better adhesive contact and helps improve bond strength.

4. WAIT FOR OPTIMUM ADHESION

– The bond strength will increase as the adhesive flows onto the surface.

– Approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24hours and 100% after 72 hours.

5. CUT A STRIP SHORT

– You can cut a strip short to fit a specific spot;

– There are 4 welding points between everything 3 LEDs; cut at the marking line on these 4 welding points.

6. CONTACT DITRIO IF COLORS ARE WRONG

– There are 4 pins inside a fast locking connector, and 3 of them are for managing colors

– There is no a universal standard for the sequence for these 4 pins, and each maker makes it their way

– If you have a kit from another brand and you see colors are wrong after adding our individual strips, probably the pins’ sequence is different

– In this case, please contact DITRIO and we will make it right for you.

Last but not least, if you have some great ideas, feel free to try and we will always give you support!

Make your bike the most amazing!

COMPATIBLE WITH DITRIO’S LED KIT: If you plan to add more LED strips to your kit InfiColors M12r from DITRIO, this is the perfect package with correct connectors to expand your system, will NOT have an issue about wrong connectors or colors.
3X BRIGHTNESS: 5050 LEDs are brighter than others and give off more light per watt; offer a light output 3 times that of the most cost effective 3528 LEDs
IP68 WATERPROOF: Silicone glue filling waterproof strips, fit where humidity or outdoor conditions are a concern, including motorcycles, ATVs, UTVs, golf carts
PACKAGE INCLUDES: 2 x 4.8″ strips; 2 x 8.7″ strips; 2 x 12.7″ strips with 6 splitters to expand your LED kit
CUSTOMIZATION SUPPORT: If you have different need for a customization project, feel free to let us know. We will be happy to help you with customized quantities and sizes.